BDS 280/580
3D Blu-ray
TM
Disc System
Applicable to all BDS x80 models Owners Manual
BDS 280/580
2
INTRODUCTION 3
DESCRIPTION AND FEATURES 3
UNPACKING 3
INCLUDED ITEMS 3
INSTALLATION LOCATION 4
BDS FRONT PANEL CONTROLS AND CONNECTIONS 5
BDS REAR PANEL CONTROLS AND CONNECTIONS 6
REMOTE CONTROL FUNCTIONS 7
CONNECTIONS 9
PREPARING THE REMOTE CONTROL 12
SETTING UP THE SYSTEM 14
USING THE BDS SYSTEM 15
USING THE DISC PLAYER 15
USING DLNA 16
STREAMING SERVICES 16
PLAYING FILES FROM USB DEVICES AND DATA DISCS 16
LISTENING TO AUDIO SOURCES 18
LISTENING TO YOUR IPOD/IPHONE/IPAD 18
LISTENING TO MEDIA VIA AIRPLAY® 19
LISTENING TO FM RADIO 19
CONFIGURING BDS FOR SPEAKER SYSTEM 19
TROUBLESHOOTING 20
SPECIFICATIONS 22
AUX COMPONENT REMOTECONTROL CODE LIST 23
Introduction
3
BDS 280/580
Introduction
Thank you for purchasing the Harman Kardon BDS 3D Blu-ray Disc™ system.
The Harman Kardon BDS systems are sleek, high-performance 2.1 (BDS 280) and 5.1
(BDS 580) channel 3D Blu-ray Disc™ system with high fidelity amplified sound.
In the years since Harman Kardon engineers have pioneered the high-fidelity
audio system, we have taken to heart the philosophy of bringing the joy of home
entertainment to as many people as possible, adding performance and ease-of-use
features that enhance the experience. The BDS series of home entertainment systems
offer a complete home entertainment solution with a wealth of listening and viewing
options in one sleek system.
To get the maximum enjoyment from your new BDS system, we urge you to read this
manual thoroughly, which:
Contains a description of the system’s features
Lists the items included in the box
Describes the BDS system and its components
Includes step-by-step instructions that will help you set up and get started
with the BDS system
CONTACT US: If you have any questions about this product, its installation or its
operation, please contact your retailer or custom installer, or visit our website at:
www.harmankardon.com
Description and Features
The BDS system features:
65W per channel of powerful, clear audio
Three HDMI inputs (one with MHL/Roku-ready) with 3D, UHD (4K) pass-
through
One HDMI output with Audio Return Channel (ARC), 2D to 3D conversion,
and UHD upscaling
Wi-Fi connectivity for Apple AirPlay®, DLNA 1.5, system updates and
control, and streaming Internet services
High quality Bluetooth audio streaming
NFC for quick Bluetooth® pairing
Dolby® Volume to maintain consistent sound levels without distracting
changes
Connect the BDS system to online sources such as Picasa, AccuWeather, and Pandora®.
The Harman Kardon BDS system is the world’s first Blu-ray system with Dolby Volume.
Enjoy the detail and clarity of your favorite movies and music in high fidelity sound with
Dolby TrueHD® and DTS-HD® (BDS 580) and DTS Digital Surround (BDS 280).
Unpacking
The carton and shipping materials used to protect your new system during shipment
were specially designed to cushion it from shock and vibration. We suggest that you
save the carton and packing materials for use in shipping if you move or if the unit ever
needs repair.
To minimize the size of the carton in storage, you may wish to flatten it. You can do it
by carefully slitting the tape seams on the cartons bottom and collapsing it. You can
store cardboard inserts in the same manner. Packing materials that cannot be collapsed
should be saved along with the carton in a plastic bag.
If you do not wish to save the packaging material, note that the carton and other sections
of the shipping-protection materials are recyclable. Please respect the environment and
discard those materials at a local recycling center.
Remove the protective plastic film from the front-panel lens. Leaving the film in place
will affect the performance of your remote control.
Included Items
The following are the items provided in the BDS system complete package.
One Remote Control
One Power Cord
One FM Antenna
BDS 280/580
4
Installation Location
One EzSet/EQ™ Microphone
Two Wi-Fi Antennas
One HDMI Cable
Three AAA Batteries
NOTE: If any of these items is missing please contact Harman Kardon
customer service at www.harmankardon.com
Installation Location
To ensure proper operation and to avoid the potential for safety hazards,
place the unit on a firm and level surface. When placing the unit on a shelf,
be certain that the shelf and any mounting hardware can support the
weight of the product.
Provide adequate space behind the system for ventilation. If the product
will be installed in a cabinet or other enclosed area, make sure there is suf-
ficient air movement within the area.
Do not place the unit directly on a carpeted surface.
Avoid installation in extremely hot or cold locations or in an area that is
exposed to direct sunlight or heating equipment.
Avoid moist or humid locations.
Do not obstruct the fan vents on the rear panel or ventilation slots on the
sides of the unit or place objects directly over or next to them.
Do not place the system directly on top of a product that generates exces-
sive heat.
Due to the heat generated by the system, there is a remote possibility that
the padding on the bottom of the system may leave marks on certain wood
or wood-veneer materials. Use caution when placing the system on soft
woods or other materials that heat or heavy objects may damage. Some
surface finishes may be particularly sensitive to absorbing such marks, due
to a variety of factors beyond Harman Kardon’s control, including the nature
of the finish, cleaning materials used, normal heat and vibration caused by
the use of the product, or other factors. Your warranty will not cover this
type of damage to furniture, so exercise caution in choosing an installa-
tion location for the component and in performing normal maintenance
practices.
The BDS system requires either a Wi-Fi home network signal or access to
a physical Ethernet connection to access certain features such as Apple
AirPlay®, DLNA®, control from the Harman Kardon Remote app, and
streaming Internet services.
Verify Line Voltage before Using
Your BDS system has been designed to be used with 100 – 240-volt, 50Hz/60Hz AC
current and includes a detachable IEC power cable intended for use in the region where
the system is sold. Connection to a line voltage other than that for which the unit is
intended can create a safety and fire hazard and may damage the unit. If you have any
questions about the voltage requirements for your specific model or about the line
voltage in your area, contact your dealer before plugging the unit into a wall outlet.
Installation Location
5
BDS 280/580
Moving the System
Before moving the system, first disconnect it from AC power and then remove any
interconnection cables to other components.
Cleaning
When the system gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only
after unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy
water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth.
IMPORTANT: NEVER use benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent.
NOTE: Do not use abrasive cleaners as they may damage the finish of metal
parts. Avoid spraying insecticide near the unit.
BDS Front Panel Controls and Connections
1. Disc slot
2. Headphone output and EzSet/EQ microphone input
3. USB/iPad/iPod/iPhone input
4. Volume ring and power button
5. NFC for Bluetooth pairing
6. Eject
7. Information display
1. Disc slot: Insert a compatible disc into the slot. The BDS systems disc slot accepts
5-inch (12 cm) and 3-inch (8 cm) discs.
2. Headphone output and EzSet/EQ microphone input: Insert the 1/8-inch
(3.5 mm) stereo mini connector from a set of headphones into this jack. When
performing EzSet/EQ speaker calibration, insert the microphone here.
NOTE: When a plug is inserted into the headphone jack, the BDS system’s
speaker output becomes automatically mute; the HDMI audio output
remains active.
3. USB/iPad/iPod/iPhone input: You can use the USB port to play audio files from
an Apple iOS device connected to the port, and to play audio files and show video and
picture files from a USB device inserted into the port. Insert the connector or device
into the USB port oriented so it fits all the way into the port. You may insert or remove
the connector or device at any time - there is no installation or ejection procedure. You
can also use the USB port to perform firmware upgrades. If an upgrade for the BDS
operating system is released in the future, you will be able to download it to the BDS
system using this port. Complete instructions will be provided at that time.
IMPORTANT: Do not connect a PC or other USB host/controller to this port as
it may damage both the BDS system and the other device.
NOTE: This USB port is rated for 2.1A output, which suggests, it is certified
to charge iPad devices (as well as iPhone and iPod devices). There is a USB
connector on the rear panel as well with similar functionality, rated for 1A
to change iPhone and iPod devices.
4. Volume ring and power button: Volume can be adjusted by touching this
capacitive ring. Slide clockwise around the ring to increase volume, counter-clockwise
to decrease volume.
IMPORTANT: If at high volume levels the audio from the speakers begins to
distort, reduce the volume as prolonged distortion can damage the system.
BDS 280/580
6
BDS Rear Panel Controls and Connections
Press this capacitive button to turn the BDS system ON. If the system is already ON, press
this button to push the system to Standby, Sleep or OFF mode.
The following table describes the different modes along with the LED display.
Mode Operation LED display
ON Press the power button White
Standby Long press on the power
button
Amber
OFF Press the power button
when in operational
mode
OFF
Sleep No activity for 15 min
Short press on the
power button on the
front panel.
Short press on the
remote control
power button or
power off command
from external IR or
remote app
Amber
NOTE: While the system is powering on the volume ring will spin till the boot
process is complete.
5. NFC for Bluetooth pairing: Near Field Communication (NFC) is used for fast
Bluetooth pairing of compatible Android
TM
and Windows® mobile devices. Place the
mobile device near the NFC logo on the top front of the system to pair or unpair.
NOTE: The system can be brought to Operational mode by tapping on the
NFC area.
6. Eject button (appears only when a disc has been inserted): Touch this button
to eject a disc from the BDS systems built-in disc slot. Before touching this button, make
sure no objects block the disc-slot.
NOTE: If you do not remove the ejected disc within 90 seconds, it will auto-
matically re-load into the disc slot for protection.
7. Information display: Various messages appear on this display in response to
commands and to show the audio/video that is playing, the BDS systems settings or
other aspects of the BDS system’s status as described throughout this manual.
BDS Rear Panel Controls and Connections
1. Main Power Switch
2. Antenna Air
3. Speaker outputs
4. Optical Digital Audio (S/PDIF) inputs
5. Trigger Output
6. AUX 1 input and AUX 2 input
7. Subwoofer output
8. Antenna Wi-Fi
9. FM radio antenna output
10. Coaxial digital audio (S/PDIF) input
11. IR Remote input
12. HDMI output (ARC)
13. HDMI 1/MHL input
14. HDMI 2 input
15. HDMI 3 (Apple) input
16. USB input
17. Network Connector
18. WPS button
19. AC Power input
1. Main Power switch: This mechanical switch turns the BDS systems power supply
ON or OFF. After you have made and verified all connections, set this switch to the ON
position. During normal use, you will usually leave this switch set to ON; it cannot be
turned ON or OFF using the remote control. To conserve energy when you are not using
the system for an extended period of time, set this switch to OFF.
2. Antenna Air: Connect the antenna accessory labeled Air here for improved Wi-Fi
reception.
3. Speaker Outputs: Use the speaker wires supplied with the speakers to connect the
speakers to the proper terminals.
The BDS system has connections for left and right speakers.
4. Optical Digital (S/PDIF) Inputs: Connect the optical digital output of an audio
source component here. The signal may be a Dolby Digital, DTS® or standard PCM digital
audio.
5. Trigger Output: This connector provides 12V DC whenever the system is ON. It can
be used to turn on and off other devices such as a powered subwoofer.
6. AUX 1 and AUX 2 Input: Use these connectors to connect to an audio source device
(such as a tape deck). Do not connect a turntable to these connectors without a phono
preamp.
Remote Control Functions
7
BDS 280/580
7. Subwoofer Output: Use the supplied mono RCA audio cable to connect this jack to
the subwoofer’s Line-Level IN LFE jack.
8. Antenna Wi-Fi: Connect the antenna accessory labeled Wi-Fi here for improved
Wi-Fi reception.
9. FM Radio Antenna Output: Connect the supplied FM antenna to this terminal.
10. Coaxial Digital Audio (S/PDIF) Input: Connect the coaxial digital output of an
audio source component here. The signal may be a Dolby Digital bit stream, a DTS bit
stream or a standard PCM digital-audio bit stream.
11. IR Remote Input: When the IR sensor on the front panel is blocked (for example,
when the system is installed inside a cabinet); connect an optional IR receiver to the
Remote IR Input connector.
12. HDMI Output (ARC): Connect the BDS system’s HDMI output to your TV’s HDMI
input. If your TV is 3D capable, then you can watch 3D content in 3D either from the BDS
systems built-in disc player or from other 3D-capable source devices connected to the
BDS systems HDMI Input connectors (see below). The systems HDMI output connection
also contains an Audio Return Channel (ARC) that carries a digital audio signal from
your TV or video display back to the BDS. It allows you to listen to HDMI devices that are
connected directly to your TV (such as a digital TV tuner) without making an additional
connection from the device to the BDS system.
NOTE: You must enable the ARC output of your TV. Consult your TV’s instruc-
tion manual for information.
13. HDMI Inputs: You can connect up to three additional source devices to the BDS
system provided the source devices have HDMI connectors. The HDMI connection
transmits digital audio and video signals between devices, so you do not have to
make any additional audio connections for devices you want to connect via an HDMI
connector. The BDS system will pass 3D video signals from 3D capable HDMI source
devices to the TV via the HDMI output connector.
Some HDMI inputs have special functionalities:
HDMI 1/MHL input: This input accepts both HDMI and MHL connections.
MHL can be used with many mobile smart devices to mirror their audio
and video content on the BDS system while powering the device (check the
owner’s manual of your device). This connector is also compatible with the
Roku Streaming Stick, which allows access to Roku services, controlled by
the BDS remote control.
HDMI 3 (Apple) input: This input accepts any HDMI source device, but if
connected to Apple products, such as the Apple TV or Mac Mini, the BDS
remote can be used to control them (this input on the remote control is pre-
programmed with standard Apple device remote commands).
14. USB Input: You can use the USB port to play audio files from an Apple iOS device
connected to the port, and to play MP3 and WMA audio files and show video and
picture files from a USB device inserted into the port. Insert the connector or device
into the USB port oriented so it fits all the way into the port. You may insert or remove
the connector or device at any time - there is no installation or ejection procedure. You
can also use the USB port to perform firmware upgrades. If an upgrade for the BDS
operating system is released in the future, you will be able to download it to the BDS
system using this port. Complete instructions will be provided at that time.
IMPORTANT: Do not connect a PC or other USB host/controller to this port, or
you may damage both the BDS system and the other device.
NOTE: This USB port is rated for 1A output and it suggests that it is certi-
fied to charge iPhone and iPod devices. There is a USB connector on the
front panel as well with similar functionality, rated for 2.1A to additionally
charge iPad devices.
15. Network Connector: Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the
BDS systems Network connector to your home network to enjoy content from AirPlay,
DLNA, and streaming services, as well as control from the Harman Kardon Remote app
for iOS and Android. Additionally, system upgrades can be downloaded and installed
from compatible devices that are joined to the network.
16. WPS Button: You can connect to the Internet using the WPS button.
17. AC Power Input: After you have made and verified all other connections, plug the
supplied AC power cord into this input and into an unswitched AC outlet.
Remote Control Functions
Power button: The BDS system has four different power modes:
OFF (ON/Standby indicator not illuminated): When the rear-panel Main
Power switch is in the OFF position or the power cord is unplugged the BDS
system is off and will not respond to any commands. Plugging the power
cord into a live AC outlet and setting the Main Power switch in the On posi-
tion will put the system into the Standby mode.
Standby (Power indicator glows solid amber): The Standby mode minimizes
energy consumption when you are not using the BDS system. When the sys-
tem is in Standby, it will not automatically turn on or play audio in response
to a signal from an AirPlay device or a Bluetooth device. When the system
is in Standby, pressing the Power button turns it on. To put the system into
Standby when it is on, press the Power button for more than two seconds.
BACK
BUTTON
CURSOR
CONTROLS
OPTIONS
BUTTON
KEYBOARD
BUTTON
OK
BUTTON
HOME
BUTTON
BDS 280/580
8
BDS Rear Panel Controls and Connections
NOTE: To conserve energy you can have the system automatically enter
the Standby mode whenever no control buttons have been pressed and no
audio signal has been present for 15 minutes.
Sleep (Power indicator glows solid amber): The Sleep mode mutes the BDS
system’s outputs and shuts off its OSD and front-panel display, but allows
the system to automatically turn on and play audio in response to a signal
from an AirPlay device or a Bluetooth device. When the system is in Sleep,
pressing the Power button turns it on. To put the system into Sleep when it
is on, press the Power button momentarily.
ON (Power indicator glows solid white): When the BDS system is on it is
operational.
TV Power button: After you program the remote control, pressing this button turns
the TV’s power ON and OFF.
Eject button: Press this button to eject a disc from the BDS system’s built-in disc player.
Before pressing this button, make sure no objects are blocking the disc slot opening.
Source buttons: Press one of these buttons to select a source device. This action will
also turn on the BDS system from the Standby mode.
The first press of the Aux button switches the BDS system to the last-used of
the sources such as Coaxial Digital, Optical Digital 1, Optical Digital 2, Analog
Audio I, Analog Audio 2, and HDMI ARC. Each successive press advances the
BDS system through those sources. Pressing the Aux button also places the
remote into the auxiliary-component control mode, enabling the remote to
use any pre-programmed and/or learned functions.
NOTE: You must use the Home menu to select Bluetooth and network-based
sources (DLNA, Pandora® and Picasa™).
Pop-Up button: Pressing this button while playing a Blu-ray Disc recording or DVD
displays its disc menu.
NOTE: This feature is disc-dependent. Not all DVDs have pop-up menus. If a
DVD has no pop-up menu, pressing the Pop-Up button may display the disc
menu, depending on how the disc’s menu system is authored.
Display button: When you are playing Blu-ray Disc and DVD recordings, pressing
this button activates a bar display containing information about the currently-playing
disc or program. When you are playing a video or photo slideshow from an inserted
USB device, pressing this button displays the Status bar. The button does not function
when the BDS system is playing materials from an iOS device, an auxiliary source or
the radio.
Channel +/– buttons: These buttons have no effect on the BDS system, but can be
programmed to control functions on an Aux component.
Volume +/– buttons: Press these buttons to increase or decrease the volume of the
BDS systems speaker outputs.
NOTE: The Volume +/– buttons do not change the volume of the HDMI audio
output.
IMPORTANT: Do not turn the volume buttons up to or past the point where
the audio from the speakers becomes distorted. Doing so can damage the
speakers.
Mute button: Press this button to mute the sound from the BDS systems speaker
outputs. Press the button again to unmute the sound.
NOTE: The Mute button does not mute the HDMI audio output.
Top Menu button: Displays the top menu of the Blu-ray Disc or DVD that is playing.
NOTE: This feature is disc-dependent. Not all DVDs have top menus. If the
DVD has no top menu, pressing the Top Menu button may display the disc
menu, depending on how the disc’s menu system is authored.
Surround button: Pressing this button cycles through all of the surround-sound
modes that are available for the active program. Each press of the Surround button will
change to the next mode in line. A pop-up display will appear, showing the modes as
you cycle through them.
NOTE: Not all surround modes will be available for all programs.
Transport Control buttons: These buttons control the BDS system’s built-in Blu-ray
Disc player, iOS and USB devices and streaming sources. When the remote is in the Aux
component control mode, they can control functions of the auxiliary component.
Replay button: Press this button to replay the previous 10 seconds of media playing
on Blu-ray, DVD, CD, USB and data discs.
Repeat button: When the BDS system is playing a Blu-ray Disc recording, pressing this
button cycles through the repeat modes such as Chapter, Title, OFF.
NOTE: Not all Blu-ray discs support repeat playback.
When the BDS system is playing a CD or listening to media stored on an iPod or USB
device, this button cycles through the repeat modes such as Track, All, OFF.
Home button: Pressing this button returns the on-screen display to the Home screen
from whatever screen is active when the button is pressed.
Back button:Pressing this button exits the current on-screen menu and displays the
previous screen.
OK button: Press this button to select the highlighted item on the on-screen menu.
Cursor buttons: Use these buttons to navigate through items on the on-screen menu.
Keypad button: Press this button to display a 10-keypad for entering letters and
numbers, such as for network setup, disc track/chapter search and so on.
Options button: Pressing this button displays any available options for the item that
is active at the time the button is pressed. When listening to an Aux source, pressing the
Options button lets you adjust the audio delay to eliminate “lip sync” errors between the
sound and picture when watching video programs with sound playing through one of
the systems rear-panel audio inputs.
Program (Red) button: Press this button to create a programmed playback list for the
currently-playing disc.
Zoom (Blue) button: Press the Zoom button to zoom in on or recede from a video
image or slide. Use the Navigation buttons to zoom in on different sections of the image.
NOTE: This function is disc-dependent for Blu-ray Disc recordings and DVDs.
Not all discs can be zoomed in.
Bookmark (Green) button: Press this button to activate the Bookmark function.
Thumbnail (Yellow) button: Press this button while playing a photo slide show to
display thumbnail images of all photos in the slide show.
Connections
9
BDS 280/580
Red, Green, Yellow and Blue buttons: When the BDS system is playing a Blu-ray
Disc recording, these buttons can activate features and menus that may vary from disc
to disc. Refer to the menu instructions for each particular disc for more information.
NOTE: These Blu-ray Disc functions may override the Bookmark, Thumbnail,
Program and Zoom functions.
Connections
CAUTION: Before making any connections to the BDS system, ensure that
the AC cord is unplugged from the system and the AC outlet. Making speaker
connections with the system plugged in and turned on could damage the
speakers or the BDS system.
Speakers and the BDS system have corresponding (+) and (–) connection terminals.
Most speakers use red to denote the (+) terminal and black for the (–) terminal.
Your BDS system has color-coded speaker terminals:
BDS 280
White left channel (+)
Red right channel (+)
Black (–) on both channels
BDS 580
White front left (+)
Red front right (+)
Blue surround left (+)
Gray surround right (+)
Green center (+)
Black (–) on all channels
Black is used to denote the (–) terminals of all channels on the BDS system.
Be sure to connect each speaker identically: (+) on the speaker to (+) on the BDS
system and (–) on the speaker to (–) on the BDS system. If one or more speakers are
miswired, it results in thin sound, weak bass and a poor stereo image.
CAUTION: Make sure the (+) and (–) bare wires do not touch each other or
the other terminal. Touching wires can cause a short circuit that can damage
your BDS system.
Connecting a Powered Subwoofer
Use a mono RCA audio cable to connect the BDS systems Subwoofer output connector
to your powered subwoofer; consult your subwoofer’s owner’s manual for information
about making connections to your subwoofer.
Connecting the FM Antenna
Connect the supplied antenna to the FM Antenna connector as shown in the following
illustration. Fully extend the antenna wire and move it to different positions until you
get the best reception of your favorite stations.
Connecting a TV or Video Display
Use the supplied HDMI cable to connect the BDS systems HDMI output to your TV/video
display’s HDMI input. The BDS system is HDMI version 1.4b with 3-D and 30/36-bit Deep
Color.
NOTE:If you have devices (such as a digital tuner) already connected directly
to your TV, you can feed their sound to the BDS system via the HDMI output
connector’s Audio Return Channel, and they will not require additional
connections to the system.
HDMI ARC
HDMI-equipped TV
BDS 280/580
10
Connections
Connecting Your HDMI Source Devices
If you have any source devices with an HDMI connector, using it will provide the best
possible video and audio performance quality. Since the HDMI cable carries both
digital video and digital audio signals, you do not have to make any additional audio
connections for devices you connect via an HDMI cable.
Connecting Your Digital Audio Source Devices
Optical Audio Source Device
If up to two of your non-HDMI source devices have optical digital outputs, connect
them to the system’s optical digital audio connectors.
Coaxial Digital Audio Source Device
If one of your non-HDMI source devices has a coaxial digital output, connect it to the
system’s Coaxial Digital Input connector.
NOTE: Make only one type of digital connection (HDMI, optical or coaxial)
from each device.
Connecting Analog Audio Source Devices
Use the systems Aux In connectors for up to two source devices that don’t have HDMI or
digital audio connectors.
Connecting to a Local Area Network (LAN)
Use a Cat. 5/5E network cable (not supplied) to connect the BDS system’s network
connector directly to a network router, a network switch, a network modem or an
Ethernet network wall jack that has Internet access.
NOTE: If you have a wireless home network, you can optionally skip this step
and use the BDS on-screen menus to connect it to Wi-Fi later on.
Connecting the Subwoofer Trigger Output
If your system has equipment that can be controlled by a DC trigger signal, connect
it to the systems Subwoofer Trigger connector with a mono 1/8-inch (3.5mm) mini-
plug interconnect cable. The system will supply a 12V DC (100 mA) trigger signal at this
connection whenever it is powered ON.
Subwoofer
To Internet
Network Modem
Connections
11
BDS 280/580
Connecting the IR Remote Input
The BDS system is equipped with an IR Remote Input connector that lets you remotely
control the system when you place it inside a cabinet or in a location that is out of the
line of sight of the remote control. Connect an external IR receiver to the systems IR
Remote Input connector.
Connecting the AC Power
The BDS system comes with a detachable AC power cord. This type of cord makes it
easier for you to install and connect all other system wiring to the systems rear panel.
NOTE:
The power requirement for the BDS system is 110V – 240V AC,
50/60Hz, 130W (BDS 580 system) or 90W (BDS 280 system).
Before connecting the AC power cord to a wall outlet, confirm that
you have correctly made all of the speaker connections, video con-
nections and audio component connections.
Connect the female end of the systems detachable power cord to the rear panel AC
Power input. Plug the other end into a working, unswitched AC outlet.
Connecting Headphones
Your BDS systems headphone connection accepts a standard 1/8-inch (3.5mm) stereo
headphone plug. When you insert the headphone plug into the connector, the systems
speaker outputs will mute; the HDMI audio output to the TV will not mute.
When headphones are connected to the systems Headphone jack, pressing the remotes
Surround button cycles between these two modes:
Harman Headphone, which virtualizes a multichannel surround soundtrack
down to two channels. This mode retains the soundtrack’s original
directional cues, allowing you to enjoy an enveloping surround-sound
experience on any ordinary pair of stereo headphones.
Headphone Bypass, which down mixes surround-sound programs into
normal stereo. This mode does not retain any multichannel directional cues
that may be in the original surround-sound program.
Connecting to Network through Wi-Fi
You can connect the unit to the internet through Wi-Fi.
The following instructions help you to connect your unit to the network.
From the home screen, select Settings > Network.
Make sure Network Connection is set to ON.
Set Type to Wi-Fi.
Select your preferred method of connecting to your wireless network under
Setup Wi-Fi.
There are four options for setting up wireless networks:
Choosing a wireless network
Configuring Wi-Fi by iOS
WPS PBC (Push Button Control)
WPS PIN
Choosing a Wireless Network
To choose a wireless network:
1. Select Choose a network from the Setup Wi-Fi list.
2. Follow the instructions on the screen to select your wireless home
network and enter your security password, if applicable.
Configuring Wi-Fi by iOS
Connect any iOS device (iPhone, iPod touch or iPad) to the front panel USB port of the
BDS. Make sure Wi-Fi is enabled on your iOS device and that it is currently connected to
your wireless home network.
AC Power Cord
BDS 280/580
12
Preparing the Remote Control
NOTE: iOS version 5 or higher is required for iOS Wi-Fi sharing.
1. Select Configure Wi-Fi by iOS from the Setup Wi-Fi list.
A pop-up will be displayed on your iOS device.
2. Select Allow to confirm that you want to share your Wi-Fi settings.
3. The connection should now be established automatically.
Check the status on your TV for confirmation
WPS PBC (Push Button Control)
1. Select WPS PBC from the Setup Wi-Fi list.
2. Press the WPS button on the rear panel of the BDS.
3. Next go to your wireless router and press its WPS button.
4. The connection should now be established automatically
Check the status on your TV for confirmation.
WPS PIN
1. Select WPS PIN from the Setup Wi-Fi list.
A PIN code is displayed on the screen.
2. Enter this same PIN on your wireless router’s internal web page
to connect. See your router’s user manual for more details.
Preparing the Remote Control
Installing the Batteries
Your systems remote control uses three AAA batteries (supplied). Insert the batteries as
shown in the illustration, making sure to observe the correct polarity.
Using the Remote Control
When using the remote control, remember to aim it towards the systems front panel.
Make sure that no objects, such as furniture, block the remotes view of the system.
Bright lights, fluorescent lights, and plasma-video displays may interfere with the
function of the remote.
The remote control has a range of about 20 feet (6.1m), depending on the
lighting conditions.
You can use the remote at an angle of up to 30° to either side of the BDS
system.
If the remote seems to operate intermittently, or if pressing a button on the remote
does not cause the remote control backlights to light up, make sure that the batteries
are inserted correctly. If the remote still operates intermittently, replace all three
batteries with new ones.
Programming the Remote Control
In addition to controlling the BDS system, you can program the unit’s remote to
control one auxiliary (aux) component. The remote is also capable of learning codes
directly from other remotes. This ability allows you to combine learned commands
with programmed codes, making the remote capable of controlling more than one
aux component. Typical aux components would be your TV, a satellite system or a cable
system. The remote will control the aux component(s) only when the aux source button
has been pressed. Pressing any other source button will put the remote back into the
normal BDS system control mode.
To Program the Remote to Control an Aux Component:
1. Check the set-up codes for the component type (for example,
TV or cable box) and its brand in the Aux Component
Remote-Control Code List, starting on page 23.
Wireless router
Preparing the Remote Control
13
BDS 280/580
2. Turn on your auxiliary component.
3. Short press the aux button and then release it.
NOTE: The remote will remain in the programming mode for 20 seconds; you
must perform step 4 within that time period.
4. Aim the remote towards the component you just turned on and enter a
set-up code number from step 1, above. Use the Program (Red) button
for the first digit; the Bookmark (green) button for the second digital;
the Thumbnail (yellow) button for the third digit; and the Zoom (Blue)
button for the last digit. If the code to be entered is “0” you do not
need to press the corresponding button; for numbers “1” and above,
press the button that number of times. When you have entered all four
digits, press the OK button – the component should now turn off.
5. If the remote control turns the component off in step 4, press the aux
button once again to store the set-up code number. To confirm that
the code has been saved, the LED indicator will blink three times.
Auto Search Method
If you have tried all of the four digit set-up code numbers listed for your device and it
still did not turn off, you should use the following auto search Method.
1. Turn on the device you would like the BDS remote to control,
either manually or with its own remote control.
2. Short press the aux device button for three seconds;
the BDS remote will enter set-up mode.
NOTE: The remote will remain in the programming mode for 20 seconds; you
must perform step 3 within that time.
3. Select the region you are located in and the type of device that you
are programming: for a US TV, do not press any of Program (Red),
Bookmark (green), and Thumbnail (yellow) or Zoom (Blue) buttons.
For an EU TV, press the Program (Red) button one (1) time
For an HDTV, press the Program (Red) button two (2) times
For a US cable tuner, press the Program (Red) button three (3) times
For an EU cable tuner, press the Program (Red) button four (4) times
For a US satellite tuner, press the Program (Red) button five (5) times
For an EU satellite tuner, press the Program (Red) button six (6) times
4. Point the BDS remote control toward the device and press the Cursor
Up button; each button press sends a power signal for one set-up
code number. Continuing to press the Cursor Up button will produce
a quick scanning of the set-up code numbers. Release the Cursor Up
button as soon as the device turns off. If you go past the correct set-
up code number, you can return to it by pressing the Cursor Down
button, one code number at a time, until the device turns back on.
5. If the BDS remote control turns the component off in step 4, press the
Aux button once again to store the set-up code number. To confirm that
the code has been saved, the LED indicator will blink three times.
Programming Individual Button Codes on the Remote
You can program codes from other component remotes onto the BDS remotes buttons
that are shown shaded in the following illustration:
1. Press and simultaneously hold down the Aux and the Program
(Red) buttons on the BDS remote control for at least three
seconds. The remote’s Aux button will blink once.
2. Place the BDS system remote and the remote from which you
want it to learn codes head-to-head about 1 inch (2.5cm) apart,
with their IR transmitter windows facing one other.
3. Press the button on the BDS remote to which you want to
teach a command. (The remote will remain in the learning
mode for 20 seconds after the button is pushed.)
4. Press the button on the other remote that you want to teach to the
BDS remote. When the IR code has been received and stored, the
Aux button’s LED will flash three times, and the BDs system remote
will remain in the learning mode, ready to learn another code. If no
IR code is received within 20 seconds, the Aux LED will flash rapidly
several times, and the remote will exit the learning mode.
5. Repeat step 3 and step 4 for each command you
want to teach the BDS system remote.
NOTE: If the aux button’s LED goes out at any time, you will need to begin
again from step 2 until it blinks three times.
6. Press the Aux button once, or wait for 20 seconds
to cancel learning program mode.
NOTE: Any previously stored setup code will be erased when program mode
is activated.
Channel Control “Punch Through” Commands
After programming the remote to control an auxiliary (aux) component, you can also
program it to control the aux component’s channel up/down and transport functions
(play, pause, etc.) even when the remote is not in the aux control mode. for example,
if the remote is programmed to operate your TV in the aux control mode, you can also
have the TV’s channel +/– functions “punch through and operate even when the
remote is in the Disc, Radio or USB control modes, for example.
NOTE: When this feature is active, TV or satellite channel +/– functions will
override any existing channel controls set to that mode.
1. Press and hold the Source button for the main device the
remote will be operating. The button will light up, go
dark and then light up again. Release the button.
2. Select the type of punch-through programming.
a. For “punch-through” channel control, press the Channel + button.
b. For “punch-through” transport control, press the play button.
3. Press the Aux button. The original source button will flash
to confirm operation. You can repeat step 1 – step 3 for any
of the remote’s source buttons (Disc, Radio, etc.).
BDS 280/580
14
Setting up the System
NOTE: Punch-through channel and transport commands will override the
existing commands for those buttons in the source modes you program. To
undo Punch-through programming, follow the same steps as above, but
press the same source button in step 1 and step 3.
Erasing a Learned Code and Restoring the Original Button Code
1. Press and simultaneously hold down the Aux and Bookmark (green)
buttons on the BDS remote control for at least three seconds. The BDS
remote will enter the learning mode after the Aux button LED turns on.
2. Press and release the remote control button that you want
to erase. The aux button’s LED will flash three times.
3. To erase other buttons, press the selected buttons.
4. To exit the erase mode, press aux button.
Resetting the Remote to Factory Default Condition
1. Press and simultaneously hold down the Aux and Thumbnail (yel-
low) buttons on the BDS remote control for at least three seconds.
2. The Aux LED will flash three times and exit learn-erase mode.
NOTE: By erasing all learned codes, all of the BDS remote buttons will return
to their original functions.
Controlling an Apple TV
If you have connected an apple TV to the BDS systems HDMI 3 input, you can also use
the BDS remote to control an apple TV that is streaming audio and video files stored
on your home network, or accessing media from an Internet service such as Netflix, as
shown in the illustration below.
Select any other input source to return the BDS remote to its normal operation.
Using the Remote after it is Programmed
Pressing the remotes Aux Input button will put the remote into the auxiliary-
control mode, and it will control the auxiliary component(s) via the codes you have
programmed into it.
To switch the remote back to the BDS system-control mode from the auxiliary-control
mode, press any of the other Input buttons or the Home button.
Setting up the System
To set up your BDS system, you will use the remote to navigate through all of the
onscreen menus and to make selections from them.
Use the Cursor Up/Down buttons to navigate through the menu list.
To select a highlighted item, press the OK button. The screen will change
depending on your selection.
To return to the previous screen, press the back button
.
1. When you turn on your BDS system for the first time, the on-
screen menu will show the Initial Setup screens. The first screen
allows you to select the language you want to use.;
2. Press OK, and the initial setup Resolution screen will be displayed.
3. Highlight your choice and press OK. Next, the initial setup Aspect Ratio
screen will appear. 16:9 Full is the best choice for most displays.
4. Highlight your choice and press the OK button. Setup is complete. Press
OK once more to finish Initial Setup and show the home menu.
Using the BDS System
15
BDS 280/580
Using the BDS System
Home Menu
Press the
to display the Home Menu screen:
If a disc has been inserted into the systems built-in disc slot, it will be displayed on the
list as either CDDA (CD), DVD Video (DVD) or Blu-ray Disc. If you have inserted a USB
device into the system’s USB port, it will appear on the list as USB.
NOTE: Digital and analog audio sources connected to the system’s rear-
panel digital and line inputs will not appear on the list. These sources can be
accessed from the AUX source in the upper right of the Home Menu screen or
by pressing the Aux input button on the remote control.
To select a source from the list, use the Cursor Up/Down buttons to highlight the desired
source, and then press the OK button to select it. You can also select a source directly by
pressing its Input button on the remote.
NOTE: Depending on the sources available in your region, there may be a
second Home Menu screen for additional sources. Press the Cursor Down
button while the cursor is on the bottom row of sources to access this ad-
ditional screen.
Using the Disc Player
You Should Know
Disc Handling Precautions
To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Do not stick paper or tape on the disc. If there is glue (or a similar substance)
on the disc, remove the substance completely before using the disc.
Do not expose the disc to direct sunlight or heat sources such as hot air ducts
or leave it in a car parked in direct sunlight, as there can be a considerable
rise in temperature inside the car.
After playing, store the disc in its case.
Do not write on the label side with a ball-point pen or other sharp writing
utensils.
Be careful not to drop or bend the disc. Disc Cleaning Precautions
Before playing, clean the disc with a cleaning cloth. Wipe the disc from the
centre out.
Do not use solvents such as benzene, thinner, commercially available clean-
ers or anti-static spray intended for vinyl LPs.
Regional Coding
Your BDS system is designed to be compatible with region management information
that is encoded on most Blu-ray Disc recordings and DVD recordings. If there is a region
code on a disc other than the one your BDS system is designed for, it will not play in
your BDS system.
Copyright
Audio-visual material may consist of copyrighted works that must not be recorded
without the permission of the owner of the copyright. Please refer to relevant laws
covering copyright protection.
Copy Protection
Your BDS system is in compliance with HDCP (High-Definition Copy Protection), and a
video display connected via the HDMI output must also be HDCP-compliant.
The BDS system supports Rovi copy protection. On Blu-ray Disc recordings and DVD discs
that include a copy-protection code, if the contents of the disc are copied using a VCR,
the copy-protection code prevents the videotape copy from playing normally.
Supported Disc Formats
The BDS system can play the following types of discs (5”/12 cm, and 3”/8 cm size):
BD-Video (single-layer or double-layer)
DVD-Video
DVD+R/+RW
DVD-R/-RW
CDDA (CD digital audio)
CD-R/RW
NOTE: The compatibility and performance of dual-layer discs is not
guaranteed.
Loading and Playing a Disc
Hold the disc horizontally when loading it, and insert it gently into the Disc slot. The disc
loading mechanism will take the disc and slide it into the unit.
Do not load more than one disc into the Disc slot.
Do not load the disc upside down.
After loading a disc into the player, press the Play button to begin playback.
Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Forward/Slow and
Search Reverse/Slow buttons to control disc playback.
BDS 280/580
16
Using DLNA
Playback Features
Content play back control (Picture): You can control the picture using the buttons
such as Play/Pause/Stop/Previous/Repeat/Next/Rotate/Zoom.
NOTE: The unit shall support the background music and picture slideshow
simultaneously.
Content play back control (Music): You can control the picture using the buttons
such as Play/Pause/Stop/Previous/Repeat/Next/Rotate/Backward/Forward.
Content Play back control (video): You can control the picture using the buttons
such as Play/Pause/Stop/Previous/Repeat/Next/Rotate/Backward/Forward.
NOTE: The unit shall support the following video formats; AVI/MPG/H264/
MKV.
Using DLNA
The Harman Kardon BDS system supports DLNA 1.5 Digital Media Player (DMP), Digital
Media Renderer (DMR). Only supported media files will be played or supported metadata
displayed on the screen. The supported files include audio, video, and photographs. The
BDS system allows two DLNA servers to work simultaneously. It supports both the wired
and wireless interfaces. The BDS can be controlled from an external control point. The
following action can be controlled from an external device:
Stop – Terminates the streaming
Source selection – Terminates the streaming controlled by external control
point and goes to respective source mode
Power- Terminates the streaming controlled by external control point and
goes to sleep mode
Volume control – Volume can be controlled by the external control point
Clear/Exit – Terminates the streaming controlled by the external control
point and goes to the previous mode/screen
Home – Terminates the streaming controlled by the external control point
and goes to home screen
Streaming Services
The Harman Kardon BDS system supports various streaming services such as Picasa,
AccuWeather, and Pandora (US, Canada, Australia, and New Zealand only).
Picasa: Picasa is an image viewing, organizing and editing service. With BDS system,
you can browse public Picasa photos or sign into your Picasa account to view your own.
The BDS system supports Picasa service through network.
AccuWeather: AccuWeather is a global weather forecasting website. You can get the
weather forecast of many places throughout the world. You can access Accuweather in
the BDS system through network and get the weather report from across the world.
Pandora: Pandora is an Internet radio service. BDS system supports Pandora service if
connected to the Internet.
NOTE: Pandora is only available in the US, Australia and
New Zealand.
Playing Files from USB Devices and Data Discs
Your BDS system can play MP3 (up to 320 kbps bitrate) audio files, display JPEG photos
and show MPEG 1 (layer 1), MPEG 2 (layers 2 and 3), and DivX home theatre profile
audio/video files stored on a USB device or a CD/DVD data disc.
To access files on a device inserted into the systems USB ports, press the Home button
and select Music, Photos, or Videos from the sources.
The screen will then show the devices file structure. Selecting a folder will show all files
of the selected type of media in the folder. If there are files of the selected type in the
devices root directory, they will also be shown.
To move up one directory level, press the Cursor Left button or select the arrow folder.
Playing Music Files
Music files can be played from connected USB drives, DLNA servers on your home
network, or inserted data discs (Blu-ray, DVD, or CD). From the Home Menu screen,
select Music. Select a folder containing music files and highlight a music file in the
folder.
Selecting a music file plays the file. If there are other music files in the folder that follow
the selected file, the system will play them in the order they appear on the on-screen
display.
If a selected MP3 file has an album cover-art ID3 tag, the art will be displayed on the
screen.
Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Down/Slow and Search Up/Slow
buttons to control music-file playback. See Remote Control Functions, on page 8, for
more information about the functions of these buttons.
When the BDS system is playing music files from a USB device or CD data disc, the
Repeat and Options functions are slightly different from when they are playing Blu-ray
Disc recordings, DVDs and music CDs.
Repeat button: Pressing this button cycles through the following repeat
modes: 1 (song), All (folder), OFF. The active repeat mode is indicated in the
screen’s top bar.
Options button: Pressing this button displays any available options for the
song currently playing:
File: Select a song to play.
Time: Display the track’s elapsed time or the track’s time remaining.
Using DLNA
17
BDS 280/580
Play Mode: Plays songs in their normal order, in random order (until you
press the Stop button) or in shuffle order (plays each song in the folder one
time in random order, then returns to the directory).
Bitrate: Shows the bitrate of the song currently playing.
Advance: Performs a rapid, audible search forward through the song.
Replay: Each press of the OK button jumps back ten seconds during play.
Find: Lets you advance to a precise time in the track.
While playing music files from a USB device or data CD, you can also view photos that
are on the same media. Press the Home button while the music file is playing, navigate
to a folder containing photo files, and select a photo file to begin a slide show.
Viewing Photos
Photo files can be played from connected USB drives, DLNA servers on your home
network, or inserted data discs (Blu-ray, DVD, or CD).
1. From the Home Menu screen, select Photo.
2. Select a folder containing photo files and highlight a photo file in the folder.
A thumbnail of the highlighted photo will be
displayed on the right of the screen.
3. Use these remote buttons while viewing photos:
Play button: Press this button to begin a slide show that displays the
photos in the current folder or directory level (starting with the high-
lighted JPEG) for 15 seconds in the order they appear in the folder.
Pause button: Press this button to freeze the current photo on the
screen. Press the Play button to resume the slide show.
Stop button: Press to end the slide show and return to the directory.
Next/Step and Previous/Step buttons: Press these buttons to skip to the
next or previous photo file in the slide show or directory.
Cursor Up button: Pressing this button while a photo is displayed
rotates the photo 180°.
Pressing this button while the directory list is displayed highlights the
previous item in the directory.
Cursor Down button: Pressing this button while a photo is displayed
shows a mirror image reflection of the photo. Pressing this button
while the directory list is displayed highlights the next item in the
directory.
Cursor Left button: Pressing this button while a photo is displayed
rotates the photo 90° counter clockwise. Pressing this button while the
directory list is displayed jumps to the next higher directory level.
Cursor Right button: Pressing this button while a photo is displayed
rotates the photo 90° clockwise.
Options button: Pressing this button while a photo is displayed shows
the Options menu, which gives you the following options:
File: Select a file to view.
Play Mode: View files in their normal order, in random order
(until you press the Stop button) or in shuffle order (displays each
image in the folder one time in random order, then returns to the
directory).
Slide Show: Select the amount of time you want each slide to be
displayed: 5 seconds, 15 seconds or 30 seconds.
Transition: Select from various types of image-to-image
transitions.
Pressing the Options button when a directory is displayed shows the Playlist Options
box.
Thumbnail (Yellow) button: Pressing this button while playing a slide show
displays thumbnail images of all photos in the slide show. Use the Cursor
and OK buttons to highlight and select images to view.
Zoom (Blue) button: Pressing this button during a slide show freezes an im-
age and zooms in 2x size. Additional presses of the button change the zoom
to 3x, 4x, 1/2x, 1/3x and 1/4x size.
BDS 280/580
18
Listening to Audio Sources
Playing Videos
To play videos in BDS system:
1. In the top directory, select the Video or AVCHD folder.
2. Select a folder containing video files and highlight a video file in the active
folder.
The video will automatically play. If there are other video
files in the folder, the BDS system will play each one in
the order they appear on the on-screen menu.
Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Forward/Slow and
Search, Reverse/Slow buttons to control music file playback.
When the BDS system is playing video files from a USB device or CD data
disc, the Repeat and Options functions are slightly different from playing
Blu-ray Disc recordings and DVDs. Repeat button: Pressing this button cycles
through the repeat modes such as 1 (current video), All (folder), OFF.
Options button: Pressing this button displays any available options for the
video that is currently playing File, Title, Chapter, Time, Play Mode, Audio,
Subtitle, Code Page, Bitrate, Advance, Replay, Adjust Lip Sync and Find.
Viewing HDMI Sources
Plug in an HDMI source device into the HDMI port on the back panel of the BDS system
to view the available HDMI sources and use the remote control to accept the HDMI
source you want. Connecting to an HDMI source allows you to transmit digital audio
and video signals. You can connect game players, set-top-box, TV box to these inputs. It
can transfer high quality audio and video. HMDI1 is Roku and MHL devices compatible.
HMDI3 is Apple TV compatible.
Listening to Audio Sources
Press the Aux button on the remote control. The system will switch to the audio input
that was selected last. Subsequent presses of the Aux button will advance through the
audio inputs in the following order: Coax In, Optical In 1, Optical In 2, Aux In 1, Aux
In 2 and HDMI ARC (Audio Return Channel). The aux Input Now Playing screen will be
displayed on the TV or flat-panel display.
In addition to playing the aux source through the system, pressing the Aux button places
the remote in the aux-control mode. If you have programmed the remote to control an
auxiliary component (either by entering in a code number or teaching commands to the
remote), the remote operates according to that programming mode.
Lip sync delay: When playing an Aux source, audio and video processing circuitry may
create a slight delay between the picture and sound. Pressing the Options button helps
you adjust the audio delay to eliminate “lip sync” errors that may occur between the
sound and picture in video programs with sound playing through one of the systems
rear panel audio inputs. Use the Cursor Up/Down buttons to increase or decrease the
audio delay until the perceived lip-sync errors disappear and the sound and picture are
properly synchronized. The amount of audio delay is shown on the systems front panel
Information display.
Listening to your iPod/iPhone/iPad
To listen to your iPod/iPhone/iPad through the BDS system:
3. Insert your iPod, iPhone or iPad into the USB port
on the front panel of the BDS system.
4. Select iPod icon from the home screen.
A Now Playing screen will be displayed on your TV.
Use the following remote control buttons to browse and select content on your iPod/
iPhone/iPad and control the device during playback:
Cursor and OK buttons: Use these buttons to navigate and select items from
the iPod/ iPhone/iPad menus.
Exit button: Pressing this button while playing content displays the iPod/
iPhone menu. Pressing this button while a menu is displayed exits that
menu and displays the previous screen.
Previous/Step button: Press this button once to skip to the beginning of the
current track. Press the button twice to skip to the beginning of the previous
track.
Next/Step button: Press this button to skip to the beginning of the next
track.
Search/Slow Reverse button: Press this button to search backward through
the current track.
Search/Slow Forward button: Press this button to search forward through
the current track.
Stop button: Press this button to stop playback.
Play button: Press this button to play the item appearing on the system’s
display.
Pause button: Press this button to pause the item that is playing. Pressing
this button while the iPod/iPhone device is paused will resume play.
Channel +/– buttons: Pressing the Channel + button moves up ten items
in the active menu. Pressing the Channel – button moves down ten items
in the active menu. Use these buttons to navigate through long menu lists
quickly.
Home button: Pressing the Home button will switch the display to the
Home screen while you continue to hear the iPod/iPhone content through
the BDS system. To display the iPod Now Playing screen again, press the Exit
or Cursor Left button.
Red button: Pressing the red button will toggle between modes such as
Random Play (albums), Random Play (songs), Random Off.
Listening to Media via AirPlay®
19
BDS 280/580
Bluetooth
Bluetooth connectivity lets you stream audio wirelessly from a device that has been
paired with the BDS system. After you have paired the BDS system with a Bluetooth
device, you can select “Bluetooth” as the active source from the Home Menu.
Listening to Media via AirPlay®
The Harman Kardon BDS system supports AirPlay®. BDS is compatible with all devices
that support AirPlay and the BDS volume can be controlled by AirPlay. If you have
connected a BDS 280 or BDS 580 system to your home network, you can stream audio
to it via AirPlay from compatible Apple devices with iOS 4.2 or newer and computers
that have iTunes 10.1 or newer that are joined on the same network.
To initiate AirPlay streaming to the BDS system from a computer with iTunes:
Launch iTunes, click the AirPlay button that appears at the bottom of the
computer’s iTunes window, and select HK BDS in displayed pop-up list.
To initiate AirPlay streaming from an iPod, iPhone or iPad device:
Tap the AirPlay button on the device’s screen and select HK BDS in the
displayed speaker-selection list.
Listening to FM Radio
Radio Input button: Pressing this button selects the BDS system’s built-in FM radio as
the systems active audio source. Pressing this button also puts the remote control into
the control mode for the radio.
NOTE: Pressing this button when the BDS system is in the Standby mode will
switch it on. If no station is found in the seek mode, it will come back to the
original frequency.
Auto scan: Press the Auto scan button on the on-screen display to automatically
scan the FM band and automatically set strong frequencies as presets.
OK button: Pressing this button sets the currently tuned-in frequency as a preset
station.
Previous/Step button
and Next/Step button : Pressing these buttons
scans to the next higher or lower receivable radio station.
Search/Slow Reverse button
and Search/Slow Forward button :
Pressing these buttons increases or decreases the tuned frequency.
Channel +/– buttons: Pressing these buttons changes to the next higher or lower
preset station.
Home button: Pressing the Home button will switch the BDS to the Home Menu
screen while the radio continues to be heard through the BDS system. To display the
Radio Now Playing screen again, press the Exit or Cursor Left button.
Configuring BDS for Speaker System
Before you use your BDS, you need to configure it to work with your particular speaker
system. Harman Kardons EzSet/EQ system uses the supplied EzSet/EQ microphone to
perform this important step automatically.
IMPORTANT: Press the remote control “Disc” button before performing the
EzSet/EQ procedure. The EzSet/EQ procedure is only available when the Disc
input is selected.
To connect the microphone:
1. Plug the supplied EzSet/EQ microphone into the
BDS’s front panel headphone connector.
2. Place the microphone at ear height in your main listening position.
3. Press the remote control’s Home button. The system’s
Home Menu screen will be displayed on the TV.
4. Use the cursor to highlight Settings then press OK to select it.
The system settings menu will be displayed.
5. Use the down cursor button to select Sound and press OK.
6. Use the cursor to select EzSet/EQ and press OK.
7. Remain silent while the test noise plays through the
speakers. As the test noise circulates among the speakers,
the screen will show which speaker is being tested.
8. When the testing process is complete, the Testing message
on the screen will change to All tests done!
9. Press the Back button to exit the EzSet/EQ test procedure.
NOTE: If the test fails, the ‘Testing’ message on the screen will change to ‘Ez-
Set/EQ failed’. Make sure all speakers are connected and the room is quiet.
10. Press the Back button, make sure all speakers are correctly
connected and perform the test again from step 5.
EzSet/EQ microphone
BDS 280/580
20
Troubleshooting
Troubleshooting
Problems Solutions
The system does not power up (the Power indicator is not lit) Check whether the system’s Power cord is properly plugged into the
system’s AC Power connector.
Check that the Power cord is plugged into a working AC outlet. If the
outlet is controlled by a switch, make sure the switch is set in the ON
position.
Check that the system’s main power switch (located on the rear panel)
is in ON position.
Sound plays through the speakers, but there is no TV picture Check the HDMI connection between the system and the TV.
Check the HDMI connection or Component Video connection between
the source device and the BDS system.
Check that the TV is turned on and is set to the proper input source.
Unplug the HDMI cable from the TV and plug it back in again.
There is no sound coming from just the subwoofer Check that the subwoofer’s Power cord is plugged into a working AC
outlet.
Check that the subwoofer’s power switch is in the ON position.
Check that the Subwoofer Level control is not turned all the way down
(fully counter clockwise).
Check that the audio connection between the system and the subwoofer
has been properly made.
Check the system’s Settings: Configuration menu to make sure that the
subwoofer volume has not been set at 10dB.
There is a constant hum in the sound Check that all input cables are plugged all the way into their connectors.
Check that all cables are at least 10 ft (3.3m) from fluorescent lights.
Check that all cable connectors are clean. If necessary, wipe them with a
cloth slightly moistened with alcohol.
Set the subwoofer’s power switch to OFF. If the hum goes away, there
is a ground loop between the subwoofer and the system. Plugging
the subwoofer’s power cord into the same AC outlet that the system is
plugged into should eliminate the ground loop.
Troubleshooting
21
BDS 280/580
Problems Solutions
The disc does not play Check that the disc is inserted correctly (label side up).
Check that the disc is the correct type: BD Video (single-layer or
double-layer),
DVD-Video, DVD+R/+RW, DVD-R/-RW, CDDA (CD digital audio),
CD-R/RW. Other disc types will not play.
Check that the disc surface is clean and not scratched.
There is noise or other interference in the picture while playing a Blu-ray Disc
recording
or DVD
Check that the disc surface is clean and not scratched.
The sound and picture are out of sync when playing to an Aux source Press the Options button and perform the Lip Sync adjustment to bring
the sound and picture into synchronization.
Cannot tune in radio stations Check that the FM antenna is correctly connected.
Adjust the antenna’s position. If necessary, use a powered FM antenna
or an outdoor FM antenna.
The system does not respond to remote-control commands Replace all three remote-control batteries with fresh ones, and make
sure that they are installed with the correct polarity.
Hold the remote closer to the system.
Check that the system’s remote sensor is in the line of sight of the
remote control.
The remote does not control programmed components (TV or video) Check that you have pressed the remote’s Aux button before trying to
operate the component.
Re-program and/or re-teach the component’s commands into the
remote.
The O symbol appears on the screen when you press a remote-control button The selected function is not permitted at the time the button is pressed.
The system does not respond to commands, or it behaves in an erratic way Unplug the system’s power cord from the AC outlet, wait 30 seconds,
then plug it back in.
BDS 280/580
22
Specifications
Specifications
BDS 280/580
Audio Section
Frequency Response @1W 20Hz – 20kHz, ±0.5dB
Slew rate 40V/ųsec
Continuous average power, stereo mode 65 Watts per channel, 20Hz – 20kHz, @ <1% THD, both channels driven into 6 ohms
Input sensitivity/impedance (line inputs) 250mV/> 10kΩ
Signal-to-noise ratio (IHF-A) –90 dB
FM tuner section
Frequency range 87.5MHz – 108.0MHz (US and EU)
Usable sensitivity IHF >14dBf
Signal-to-noise ratio (mono/stereo) 55dB/55dB
Distortion (mono/stereo) 0.3%/0.5%
Stereo separation –40dB @ 1kHz
Image rejection 70dB
IF rejection 80dB
General
Power requirement 100 – 240 V AC, 50/60Hz
Power consumption (BDS 280) 90 W maximum; <0.5W standby
Power consumption (BDS 580) 120 W maximum; <0.5W standby
Dimensions 400.2 mm (L) x 283.8 mm (W) x 78.5 mm (H)
Weight 3.56 kg (BDS 280), 3.72 kg (BDS 580)
THD/1kHz DVD/CD: 0.1%
Supported disc formats 5-inch (12cm) or 3-inch (8cm)
Video section
Television format NTSC or PAL (selectable)
HDMI® version With 3-D and 30/36-bit Deep Color
Video signal receiver NTSC (USA) or PAL (EU)
Aux Component Remote-Control Code List
23
BDS 280/580
Aux Component Remote-Control Code List
TV/DVR
Manufacturer Code Numbers
A MARK 0132 0122 1088 1105
ACER 0143 1167
ADMIRAL 0192 1105 1088 1023
ADVENT 0151
AIWA 0027 1110
AKAI 0053
1042
1093
1022
1089
1020
1056
1011
1053
AKAL 0160 0123
AKURA 1020
ALBA 1040 1020
AMPRO 0164
ANAM 0122 0112 0109 0106 0045
ANSONIC 1049
1148
1144 1145 1146 1147
AOC 0128
0150
0123 0122 0037 0146
APEX 0154 2014 2016
ARC EN CIEL 1059 1056 1024 1019 1017
ARCAM 1017
ARISTONA 1086
1025
1060
1023
1048
1022
1047 1033
ASA 1201 1096 1088 1023 1012
AUDIOVOX 0012 0155
AUTOVOX 1088 1044 1025
BANG & OLUFSEN 1088
BARCO 1202
BASICLINE 1020
BAUR 1102 1077 1076 1075
BEKO 1022
BENQ 0166 0170 1165
BLAUPUNKT 0084 1077 1076 1075 1011
BLU:SENS 0174
1112
0178
1120
0185
1138
1098
1170
1109
1175
BLUE SKY 1144
1152
1157
1148
1153
1158
1149
1154
1150
1155
1151
1156
BRANDT
ELECTRONIQUE
1059 1056 1024 1019 1017
BRION VEGA 1203 1088 1023
Manufacturer Code Numbers
BROCKSONIC 0206 0205 0072
BRUNS 1088 1023
BUSH 1092 1043 1040 1020 1010
BUSH(UK) 1044
CANDLE 0128 0123
CAPEHART 0059
CELLO 1178 1182
CENTURION 0171 0123
CENTURY 1088 1023
CETRONIC 0045
CGE 1105
CIHAN 1032
CITIZEN 0132 0128 0123 0045
CLASSIC 0045
COBY 0104
COMTEL 1032
CONCERTO 0128
CONTEC 0045 1010
CONTINENTAL
EDISON
1059 1056 1024 1019 1017
CORANDO 0172
CORONADO 0132
CRAIG 0159 0158 0157 0045
CROSLEY 1088 1023
CROWN 0132 0045
CURTIS MATHES 0128 0123 0132 0080 0082
CXC 0045
DAEWO 0132
0114
0102
0128
0111
0087
0127
0108
0045
0119
0106
1022
0116
0105
DANSAI 1022
DAYTRON 0132 0128
DECCA 1091 1032
DECCA(UK) 1038
DEGRAAF 1015
DELL 0075
DGM 1190
DIBOSS
0186
DIGI LINK
0200
BDS 280/580
24
Aux Component Remote-Control Code List
TV/DVR
Manufacturer Code Numbers
DIGIFUSION 1184
DIGITREX 1192
DISH NETWORK 0188 2012
DIXI 1022
DORIC 1029
DUMONT 1201 1199 1096 1088 1023
DUMONT-FINLUX 1044 1012
DYNASTY 0045
DYNATECH 0063
DYNATRON 1022 1020
DYNEX 0014 0083 0107 0189
ELBE 1211 1105 1095
ELCIT 1032 1023
ELECTROGRAPH 0064
ELECTROHOME 0132 0115
ELEMENT 0048 0113
EMERSON 0205
0139
0126
0162
0132
1195
0159
0128
1088
0158
0123
1023
0157
0045
EMOTION 1189
EPSON 0074
ERRES 1033 1022
FENNER 1022
FERGUSON 1197
1075
1196
1062
1099
1047
1077
1024
1076
1001
FIDELITY 1047
FIDELITY(UK) 1099
FINHER 1204
FINLANDIA 1018
FINLUX 1201
1012
1199 1096 1088 1044
FIRST LINE 1157
1164
1159
1166
1160
1168
1161
1169
1163
FISHER 1088 1043 1023
FORGESTONE 1099 1047
FORMENTI 1088
FORMENTIPHOENIX
1088
FUJITSU
1195 0041 0042 0249 0250
FUNAI
0045
Manufacturer Code Numbers
FUTURETECH
0045 0195 1195
GATEWAY 0198 0199
GBC 1043
GE 0163
0123
0159
0121
0145
0087
0133
0029
0128
GEC(UK) 1061
GOODMANS 1043 1022 1010 1036 1041
GORENJE 1124 1034
GRANADA 1104
1010
1033 1029 1022 1018
GRANADA(UK) 1043
GRUNDIG 0193
1076
0203
1075
1200
1011
1096 1077
GVA 0131
HAIER 0135 0213 1028
HALL MARK 0128
HANNSPREE 1185
HANSEATIC 1043 1022 1020 1010
HARMAN
KARDON
0201
HIFIVOX 1080
1017
1059 1056 1024 1019
HINARI 1195 1043 1020 1010
HISENSE 0137 0140 0216
HITACHI 0147
1206
1082
1059
1035
1012
0144
1101
1080
1058
1026
1010
0132
1094
1069
1056
1024
0128
1093
1066
1055
1018
0123
1085
1061
1043
1015
HP 0076 0218
HUMAX 0217 1030
HYPER 1206
HYPERION 0073
HYTEK 0016
HYUNDAI 0220 0236
IKASU 1212
ILO 0009 0056
INFINITY 0148
Aux Component Remote-Control Code List
25
BDS 280/580
TV/DVR
Manufacturer Code Numbers
INKEL
0120
INNO HIT
1068
INSIGNIA
0099 0107
INTERFUNK
1104
1023
1088
1022
1056
1020
1033
1024
INTERVISION 1121
1115
1119
1114
1118
1113
1117
1111
1116
ISIS 1186
ITT 1100 1092 1046 1040
ITT-NOKIA 1100 1092 1058 1040
JBL 0148
JCPENNY 0145 0132 0128 0123 0115
JENSEN 0019
JET POINT 1208
JOHN LEWIS 1193
JVC 0134
1053
0087
1047
0079
1043
1092
1010
1056
KARCHER 1068 1012
KATHREIN 1124 1034
KAWASHO 0173
KEC 0045
KENMARK 1183
KENNEDY 1025
KENWOOD 0204 0123
KLEGG 0066
KLH 0006
KMC 0132
KNEISSEL 1105
KNOLLSYSTEMS 0224
KOGAN 1180
KONKA 0225
KRIESLER 1060
1023
1048
1022
1047 1033 1025
KTV 0162 0132 0123 0045
LEVEL 1191
LG(GOLDSTAR) 0132
0002
2004
0128
0013
0122
0086
0110
1022
1073
LINSAR 1187
Manufacturer Code Numbers
LLOYTRON 0173 0172
LODGENET 0069
LOEWE
0227 1027
LOEWE OPTA
1088 1023 1022 1020
LOGIK 0069 1099 1091 1047
1038
LUMA
1022
LUXMAN 0128
LUXOR 1058
LXI 0148 0145 0077
M ELECTRONIC 1201
MAGNADYNE 1088 1023
MAGNASONIC 0015
MAGNAVOX 0148
0030
2008
0145
0040
2009
0132
0088
2010
0128
0138
2011
0123
2007
MANESTH 1022
MARANTZ 0148 0123 0115 1022
MARELLI 1088
MARK 1022
MARKS &
SPENCER
1182
MATSUI 0148
1020
1091
1001
1043 1040 1038
MAXENT 0199
MEDION 1031
MEMOREX 0128 0069
METZ 0084
1023
1088
1011
1077 1076 1075
MGA 0128 0123 0115
MINERVA 0084
1075
1200
1011
1096 1077 1076
MINTEK 0065
MISAKI 0195
BDS 280/580
26
Aux Component Remote-Control Code List
TV/DVR
Manufacturer Code Numbers
MITSUBISHI 0168
0115
1090
1077
1046
1029
1011
0167
0077
1089
1076
1043
1023
1010
0160
1124
1083
1075
1039
1022
1007
0128
1092
1082
1057
1038
1020
0123
1091
1079
1050
1034
1013
MOTOROLA 2005
MTC 0176 0175
MURPHY 1021
NATIONAL 0182
0148
0181
1018
0180 0179 0177
NEC 0125
1043
0123
1010
0121 0115 0010
NECKERMANN 1102 1088 1078 1023
NEON 1182
NIKEI 0045
NOBLEX 1204 1205
NOKIA 1100 1092 1046 1040
NORDMENDE 1094
1056
1009
1093
1053
1080
1024
1069
1019
1059
1017
OKI 1045 1049 1081 1087 1097
OLEVIA 0007
ONKING 0045
ONWA 0045
OPTOMA 0229
OPTONICA 0077
ORION 0211
0230
1038
0210
1210
0209
1209
0208
1091
0207
1040
OTTO VERSAND 1207
1076
1010
1102
1075
1092
1043
1078
1022
1077
1020
PANASONIC 0169
1136
1131
1004
0148
1135
1130
0087
1134
1129
0061
1133
1128
1137
1132
1002
Manufacturer Code Numbers
PATHE’ MARCONI 1059 1056 1024 1019 1017
PHILCO 0148
0045
0132
1105
0128
1088
0123
1023
0115
PHILIPS 0148
0036
1108
1095
1071
1060
1033
1022
1177
0145
0035
1107
1088
1070
1054
1032
1020
1179
0132
0034
1104
1086
1068
1048
1027
1014
1181
0128
0033
1100
1084
1067
1047
1025
1008
1213
0123
0089
1099
1078
1061
1046
1023
1176
PIONEER 0128
1024
0123
1022
0024
1020
1069 1056
POLAROID 0003 0004 0005 0006 0043
PORTLAND 0132 0128 0231
PROLINE 1209 1020
PROSCAN 0133
PROTECH 1022
PROTON 0165
0008
0132 0128 0122 0059
QUASAR 0087 0032
QUELLE 1200
1044
1011
1096
1038
1077
1022
1076
1020
1075
1012
RADIO SHACK 0197
0045
0196 0180 0132 0128
RADIOLA 1078
1025
1060
1023
1048
1022
1047 1033
RADIOMARELLI 1088
1022
1083 1082 1029 1023
RBM(UK) 1044
RCA 0163
0123
2012
0161
0115
0145
0089
0133
0188
0128
2001
REALISTIC 0196 0167 0045 1029
REDIFFUSION 1083 1082
REX 1198 1025 1022
Aux Component Remote-Control Code List
27
BDS 280/580
TV/DVR
Manufacturer Code Numbers
RFT 1127
1122
1126 1125 1124 1123
RTF 1023
RUNCO 0153 0152 0044 0046
SAA 0183
SABA 1094
1059
1017
1093
1056
1009
1088
1024
1080
1023
1069
1019
SALORA 1058 1018
SAMPO 0128 0123 0059
SAMSUNG 0226
0022
1204
0145
0020
1068
0132
1226
1022
0128
1208
2003
0124
1205
SANYO 0054
1043
0026
1038
0091
1023
1092
1012
1091
1010
SBR 1086
1033
1084
1022
1061 1047 1046
SCEPTRE 0232
SCHNEIDER 1196
1047
1086
1033
1078
1025
1060
1023
1048
1022
SCOTT 0132 0128 0045 1195
SEARS 0145 0132 0128
SELECO 0078
1022
1199 1198 1105 1025
SHARP 0132
1207
0128
1043
0077
1010
0062 0092
SHERWOOD 0067
SIEMENS 0084
1011
1077
1010
1076 1075 1015
SIGNATURE 0069
SINGER 1105 1088 1023
SINUDYNE 1209 1210
SOLE 0068 0233
SONY 0212
0031
1103
1062
1006
0194
0028
1102
1043
1172
0136
0060
1091
1038
1173
0130
0093
1065
1016
1174
0117
1106
1064
1010
SOUND WAVE 1020
Manufacturer Code Numbers
SOUNDESIGN 0128 0045
SPECTRICON 0122
SSS 0045
STERN 1198 1025 1022
SUNKAI 1210
SUPERSCAN 0195
SUPRATECH 1139 1140 1141 1142 1143
SYLVANIA 0148
0057
0145
0094
0128
0098
0123
0142
0025
SYMPHONIC 0184 0195
TANDBERG 1080 1056 1023
TANDY 0077
TATUNG 0063 2018
TCL 0234
TEAC 0095 0244
TECHNICS 0181
TECHWOOD 0128
TEKNIKA 0132
0045
0128
1195
0123 0115 0069
TELEFUNKEN 1069 1059 1056 1024
TELERENT 0069
TENSAI 1022
TERA 0156
THOMSON 0191
1080
1056
1019
0190
1074
1053
1017
1094
1072
1044
1009
1093
1069
1040
1005
1082
1059
1024
1003
THORN 1099 1047
THORN-
FERGUSON
1196
1099
1197
1047
1201
1024
1103 1102
TIVO 0051
2204
0052 1051 1052 2207
TMK 0128
TOSHIBA 0202
0103
1044
1001
0129
1105
1043
1162
0063
1096
1042
0058
1092
1037
0096
1063
1010
TOTEVISION 0132
TRISTAR 1099
BDS 280/580
28
Aux Component Remote-Control Code List
TV/DVR
Manufacturer Code Numbers
TRIUMPH 1199 1044
TRUTECH 0055
UHER 1044
ULTRAVOX 1088 1023
UNIVERSUM 1201
1012
1102 1077 1076 1075
VIDEO CONCEPTS 0160
VIDEOCON 1188
VIDIKRON 0235 0253
VIDTECH 0128
VIEWSONIC 0011 0038 0047 0254 0255
VIORE 0245 0237
VISTRON 1194
VISUAL
INNOVATIONS
1183
VITO 0070
VIZIO 0001 0002 0049 0050 0246
VOXSON 1088 1023
WARDS 0148 0132 0128 0069
WATSON 1077 1076 1075
WEGA 1088 1043 1010
WEGA COLOR 1023
WELTBLICK 1022
WESTINGHOUSE 0017
1022
0018 0023 0060 0100
WINBOOK 0071
WINTERNITZ 1206
YAMAHA 0128 0123 0238 0239
YORK 0128
YUPITERU 0045
ZANUSSI 1198 1025 1022
ZENITH 0090
2019
0069 0240 2002 2006
ZONDA 0122
Manufacturer Code Numbers
ABC 3011 3001
ALLEGRO 3111
AMERICAST 3212
AMINO 3015 4031
ARCHER 3112
BELCOR 3113
BT CABLE 4007
CABLE STAR 3113 3033
CABLETIME 4016 4012 4011 4008
CISCO 3016 3021 4032 4033
CITIZEN 3111
CLYDE CABLE
VISION
4017
COLOUR VOICE 3090 3085
COMCAST 3007
4040
3040 3054 4014 4015
DECAST CANAL 4010
DIGI LINK 3114
EAGLE 3186
EASTERN 3070 3066
ELECTRICORD 3039
EMERSON 3112
FILMNET 4020 4018
FOXTEL 4019
FRANCE TELECOM 4021 4013
GEC 4017
GENERAL
INSTRUMENT
3054 4040
FOCUS 3116
FOXTEL 3043
G.I 3097 3096 3017 3011 3001
GC ELETRONICS 3113
GEMINI 3060 3032
GENERAL 3210
Aux Component Remote-Control Code List
29
BDS 280/580
CABLE BOX
Manufacturer Code Numbers
GENERAL
INSTRUMENT
3210 3054
GOODMIND 3112
HANLIN 3208
3099
3175
3056
3117 3101 3100
HITACHI 3188 3001
JASCO 3111
JERROLD 3210
3073
4022
3188
3017
4001
3162
3011
3097
3002
3096
3001
LINSAY 3118
MACOM 3191
MAGNAVOX 3068 3019 3017
MOTOROLA 3022
4035
3023
4036
3021
4038
3031 4034
MOVIE TIME 3039 3035
NSC 3190 3035
OAK 3220 3197
PACE 3179
PANASONIC 3214 3189 3177 3176 3053
PANTHER 3114
PHILIPS 3090
4023
3085 3020 3019 3013
PIONEER 3216
3041
3215
3001
3209
4002
3171 3119
POPULAR
MECHANIC
3116
PRELUDE 3120
PRIMESTAR 3162
QUEST 3037 4041
RADIOSHACK 3213 3112 3111
RCA 3214 3053
RECOTON 3116
REGAL 3208 3101 3100 3099 3056
REMBRANT 3032
SAGEM 4028
SAMSUNG 3003
4002
3186 3072 4024 4003
SATBOX 4004
Manufacturer Code Numbers
SCIENTIFIC
ATLANTA
3222
4026
3221
4025
3203
4006
3183
4005
3038
4039
SEAM 3121
SIGNATURE 3188 3001
SPRUCER 3189 3177 3081 3053
STARCOM 3163 3011 3002
STARGATE 3120
TANDY 3024
TELECAPATION 3028
TELESERVICE 4011
TEXSCAN 3036
TFC 3122
TIMELESS 3123
TIVO 3029 3030 4029 4030
TOCOM 3205 3170
TUDI 4027
UNITED CABLE 3011 4001
UNIVERSAL 3113 3042 3039 3034 3033
VIDEOWAY 3211 3124
VIEWSTAR 3190
3019
3089 3086 3053 3025
VISIOPASS 4009
WESTMINSTER
CABLE
4007
ZENITH 3219 3211 3125 3065
ZENTEK 3116
BDS 280/580
30
Aux Component Remote-Control Code List
SATELLITE TUNERS
Manufacturer Code Numbers
AIWA 6141
AKAI 6033
ALBA 6111 6001
ALPHASTAR 5172
ALPHASTAR DBS 5150
ALPHASTAR DSR 5142
AMSTRAD 6132
ANKARO 6121
ASTRO 6183
6178
6182
6177
6181
6176
6180 6179
BARCOM 6121
BIRDVIEW 5125
BLAUPUNKT 6090 6038
BUSH 6106 6048
BUSH(UK) 6053
CANAL 5078 6013
CANAL DIGITAL 6013
CANAL PLUS
(CANAL+)
6013
CHANNEL
MASTER
5061 5025 5021 5020
CHAPARRAL 5151
5016 5015
CITOH 5060
DIRECTV 5009
6005
5010 5014 6002 6003
DISH NETWORK 5064
DRAKE 5181 5113 5018 5017 5013
DX ANTENNA 5183 5079 5052 5031
ECHOSTAR 5185
5153
5008
6025
5184
5152
5038
6028
5178
5097
5040
5177
5095
6047
5163
5064
6021
ELECTRO HOME 5092
FERGUSON 6124
6063
6111
6053
6106
6052
6067
6048
6064
6045
FINLUX 6010 6009
FOXTEL 5076 6016
FTE 6080
FUBA 6121 6047 6014
FUJITSU 5034 5029 5024
Manufacturer Code Numbers
GOLDEN
INTERSTAR
6020
GOODMANS 6111
GRUNDIG 5074
6015
6090 6067 6053 6038
HITACHI 5155 5004 6111 6106
HOUSTON
TRACKER
5163
HUGHES 5189 5137 5005 5006
HUMAX 5072 6007
ITT 6067
ITT-NOKIA 6067
JANIEL 5066
JERROLD 5184 5168 5154
KATHREIN 5110 6090 6080 6033 6001
KCPI 5080 6037
KOSMOS 6080
KYOTO GMI
ATLAN
6143
LEGEND 5153
LEMON 6174
LOEWE 6175
LORENZEN 6174 6165 6164 6163 6161
MACOM 5071 5070 5069 5065 5017
MAGNAVOX 5173 5161
MARANTZ 6033
MASPRO 6106 6053
MEMOREX 5153
METZ 6090
MINERVA 6090
MITSUBISHI 5007 6090
MOTOROLA 5012 5019
MULTISTAR 6080
NEC 6073 6046 6036 6030
NETA P562 6140
NEXTWAVE 5123
NOKIA 6067
NORSAT 5073
6046
OPTIMUS 5166
OTTO VERSAND 6090
Aux Component Remote-Control Code List
31
BDS 280/580
SATELLITE TUNERS
Manufacturer Code Numbers
PACE 5187
6067
6017
5028
6064
6039
5043
6063
5082
6053
6124
6048
PACE MSS SERIES 6067
PANASONIC 5169
6031
5066 5157 5053 6124
PANSAT 5120
PERSONAL CABLE 5118
PHILIPS 5075
6032
6124
6019
6121 6053 6033
PICO 5107
PREMIERE 5057 6008
PRESIDENT 5104 5081
PRIMESTAR 5175 5168 5154 5112 5002
QUADRAL 6173
6168
6172
6167
6171
6166
6170 6169
QUELLE 6090
RADIOLA 6053
RADIX 6047
RCA 6047
REALISTIC 5190
5058
5165
5067
5139
6035
5001 5158
SAMSUNG 5142
6127
5022
6080
5026
6034
5045 6132
SAT 6127
SATELLITE
SERVICE
5088 5035
SCIENTIFIC
ATLANTA
5039 5056
Manufacturer Code Numbers
SCHNEIDER 6053
SIEMENS 6090 6038
SKY 5043 5044 6006 6017 6018
SKY MASTER 6133
SKYLAB 6121
SONY 5105 5062 5041 6029
STAR CHOICE DBS 5159
STARCAST 5047
SUPER GUIDE 5123 5027
TECHNISAT 6047
TEECOM 5109
5030
5093 5091 5090 5033
TELECOM 6041
TELEFUNKEN 6083
THORN-
FERGUSON
6067
6052
6064
6045
6048
6023
6063 6053
TOPFIELD 5063 6011
TOSHIBA 5023 5162
5180
5083
5050
5161
5179
5081
5049
5160
5166
5055
5048
5126
5103
5054
5032
VIASAT 5077 6012
VORTEC 6142 6132
WISI 6127
6004
6047 6026 6027 6022
ZEHNDER 6127 6080
ZENITH 5188
5084
5119
5059
5094
6044
5087 5085