2020
SPUHR 2020
ISMS CATALOG
IDEAL SCOPE MOUNT SYSTEM
1
ABOUT THIS CATALOG
Thank you for your interest in our products!
This catalog contains the full assortment of scope mounts and separate
rings that make up the ISMS product family.
The order of presentation is from the lowest mount with no tilt to the highest
with maximum tilt from the smallest ring size/tube diameter to the largest.
If you cannot find a specific mount you are looking for, and you have a special
requirement to fill, we are able to provide mounting solutions outside of our
normal product range in this catalog. Such projects do require a minimum
volume of 50 units.
In an effort to make this catalog as universal as possible it does not contain
any prices, but we have made an effort to include all measurements and the
weights of the products when mounted.
We hope you will find this catalog to your liking and we welcome any feedback
you may have. If you want to see more of our capabilities, please visit our
website www.spuhr.com or www.spuhr.biz.
Yours sincerely,
Håkan Spuhr
2
CONTENT
ABOUT THIS CATALOG ........................................................................................... 1
ABOUT ISMS ........................................................................................................... 4
PICATINNY MOUNTS .............................................................................................. 5
30 mm Unimounts .................................................................................................. 5
34 mm Unimounts .................................................................................................. 9
35 mm Unimounts ................................................................................................ 16
36 mm Unimounts ................................................................................................ 18
40 mm Unimounts ................................................................................................ 20
ACCURACY INTERNATIONAL DOVETAIL MOUNTS .............................................. 21
30 mm Unimounts ................................................................................................ 21
34 mm Unimounts ................................................................................................ 21
SAKO TRG/TIKKA T3 DOVETAIL MOUNTS ........................................................... 23
30 mm Unimounts ................................................................................................ 23
34 mm Unimounts ................................................................................................ 23
36 mm Unimounts ................................................................................................ 24
40 mm Unimounts ................................................................................................ 24
SAUER DOVETAIL MOUNTS ................................................................................. 25
30 mm Unimounts ................................................................................................ 25
34 mm Unimounts ................................................................................................ 25
SEPARATE PICATINNY RINGS ............................................................................... 26
30 mm Separate Rings .......................................................................................... 26
34 mm Separate Rings .......................................................................................... 26
RED DOT MOUNTS ............................................................................................... 27
Aimpoint Micro Mounts ....................................................................................... 27
Trijicon MRO Mounts ........................................................................................... 29
PICATINNY GEN2 SCOPE BASES ........................................................................... 30
Remington 700 ..................................................................................................... 30
Sauer STR .............................................................................................................. 32
Tikka T3/T3x ......................................................................................................... 32
Winchester Model 70 ........................................................................................... 33
ACCESSORIES ........................................................................................................ 34
Simrad Interfaces ................................................................................................. 39
Non-Spuhr Accessories ......................................................................................... 41
ISMS SPARE PARTS LIST ....................................................................................... 42
Side Clamps .......................................................................................................... 43
Top covers ............................................................................................................ 43
Other .................................................................................................................... 44
Clamping Screws................................................................................................... 44
“Wedge” ............................................................................................................... 44
3
CHOOSING A MOUNT .......................................................................................... 45
Picatinny or direct/dovetail mount? .................................................................... 45
Cantilever or block mount? .................................................................................. 45
Height ................................................................................................................... 45
Night vision/thermal compatibility ...................................................................... 46
Tilt ......................................................................................................................... 46
Adding accessories ............................................................................................... 46
Adding a secondary optic ..................................................................................... 46
OTHER PRODUCTS ............................................................................................... 48
4
ABOUT ISMS
The Ideal Scope Mount System (ISMS) originated in a customer request to
help develop a way to mount the optics to a rifle in such a way that the rings
did not obscure the turrets of the scope. With traditional mounting solutions
the user has a choice between obscuring either the elevation or the windage
adjustments (and in some cases both!)
The first trick was to make the cut of the rings diagonal rather than
horizontal or vertical, thus putting the “fat” part of the rings offset from the
scope turrets – a solution we ended up patenting in US patent 8,733,011 and
European patent EP2478324. Then we made the sides of the rings straight as
to further minimize the profile. We also added indexing marks to the rear
ring to draw the eye to the adjustment reading.
We machine the mounts from 7000 grade billet aluminum, as this material
is lightweight and extremely strong, even outperforming construction steel
in several aspects. Our fasteners are 10.9 Grade steel with zinc-nickel
corrosion resistance, and they come pre-waxed to ensure proper torque
values.
The second request was to find a way to attach accessories to the scope
mount without having to replace parts of the mount or having to re-zero the
scope in between changes – it was also requested that the accessories zero
should have a high degree of repeatability. The resulting solution is the
Spuhr Interface, which can be found on all our mounts, and most of our
weapon upgrade kits.
The resulting product was the first ever scope mounting system - a system
where the mount is not just merely there to attach the primary optics to the
rifle, but to also hold accessories that may not fit elsewhere on the rifle
(especially on a bolt action rifle that only has the Picatinny scope base or a
dovetail on the receiver).
An added bonus is the bubble level installed into the rear of the mount and
the 10-degree “wedge” we include with all our mounts to make installation
as easy as possible by aligning the bottom of the erector housing of the scope
to the bridge of the mount, thus aligning the reticle with bubble level and the
mount body.
5
PICATINNY MOUNTS
30 mm Unimounts
SP-3001 Scope Mount Ø30 H30mm/1.181" 0MIL PIC
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 30 mm/1.18”
Length: 126 mm/4.96”
Weight: 237 g/8.4 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700065
SP-3601 Scope Mount Ø30 H30mm/1.181" 6MIL PIC
Rings: 30 mm
Tilt: 6 MIL/20.6 MOA
Height: 30 mm/1.18”
Length: 126 mm/4.96”
Weight: 264 g/9.3 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700133
SP-3026 Cantilever Scope Mount Ø30 H32mm/1.26" 0MIL PIC
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 32 mm/1.26”
Length: 140 mm/5.51”
Weight: 223 g/7.9 oz
Note: “The Noveske Shooting Team Mount.” Suitable for AR style rifles.
Allows the scope to be mounted 70 mm/2.76” further forward.
EAN: 7340150700119
QDP-3006 Scope Mount Ø30 H34mm/1.35" 0MIL QDP
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 126 mm/4.96” (mount body only)
Weight: 254 g/9.0 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Quick-release model.
EAN: 7340150705299
6
QDP-3046 Cantilever Scope Mount Ø30 H34mm/1.35" 0MIL QDP
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 151 mm/5.94” (mount body only)
Weight: 265 gr/9.4 oz
Note: Dual adjustable QDP levers. Suitable for AR-style rifles. Allows
the scope to be mounted 40 mm/1.57” further forward. Quick-
release model.
EAN: 7340150705121
SP-3006 Scope Mount Ø30 H34mm/1.35" 0MIL PIC
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 126 mm/4.96”
Weight: 249 g/8.8 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails but may be too low for some
lens caps.
EAN: 7340150700096
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96” (mount body only)
Weight: 270 g/9.6 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Quick-release model.
EAN: 7340150705145
SP-3002 Scope Mount Ø30 H38mm/1.5" 0MIL PIC
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 264 g/9.3 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Aligns with many clip-on
NV attachments.
EAN: 7340150700072
QDP-3016 Cantilever Scope Mount Ø30 H38mm/1.5" 0MIL QDP
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 151 mm/5.94” (mount body only)
Weight: 278 gr/9.8 oz
Note: Dual adjustable QDP levers. Suitable for AR-style rifles. Allows
the scope to be mounted 40 mm/1.57” further forward. Quick-
release model.
EAN: 7340150705039
7
SP-3016 Cantilever Scope Mount Ø30 H38mm/1.5" 0MIL PIC
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 252 g/8.9 oz
Note: Suitable for AR style rifles. Absolute co-witness with back-up
iron sights. Allows the scope to be mounted 40 mm/1.57” further
forward.
EAN: 7340150700102
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 140 mm/5.51”
Weight: 242 g/8.5 oz
Note: Suitable for AR style rifles. A combination of the SP-3026 extended
cantilever and the height of the SP-3016. Absolute co-witness with
back-up iron sights. Allows the scope to be mounted 70 mm/2.76”
further forward.
QDP-3602 Scope Mount Ø30 H38mm/1.5" 6MIL QDP
Rings: 30 mm
Tilt: 6 MIL/20.6MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96” (mount body only)
Weight: 270 g/9.6 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Quick-release model.
EAN: 7340150705152
SP-3602 Scope Mount Ø30 H38mm/1.5" 6MIL PIC
Rings: 30 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 261 g/9.2 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Aligns with many clip-on
NV attachments.
EAN: 7340150700140
QDP-3616 Cantilever Scope Mount Ø30 H38mm/1.5" 6MIL QDP
Rings: 30 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 151 mm/5.94” (mount body only)
Weight: 279 gr/9.8 oz
Note: Dual adjustable QDP levers. Suitable for long-range AR-style rifles.
Allows the scope to be mounted 40 mm/1.57” further forward.
Quick-release model.
EAN: 7340150705046
8
SP-3616 Cantilever Scope Mount Ø30 H38mm/1.5" 6MIL PIC
Rings: 30 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 242 g/8.5 oz
Note: Suitable for long-range AR style rifles. Absolute co-witness with
back-up iron sights. Allows the scope to be mounted 40 mm/1.57”
further forward.
EAN: 7340150700157
SP-3902 Scope Mount Ø30 H38mm/1.5" 9MIL PIC
*** COMING IN 2020 ***
Rings: 30 mm
Tilt: 9 MIL/31 MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: TBD
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Aligns with many clip-on
NV attachments.
EAN: TBD
Tilt: 0 MIL/MOA
Height: 48 mm/1.89”
Length: 126 mm/4.96”
Weight: 269 g/9.5 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails in conjunction with high
clip-on NV attachments such as the NSV-80.
SP-3024 Cantilever Scope Mount Ø30 H48mm/1.89" 0MIL PIC
Rings: 30 mm
Tilt: 0 MIL/MOA
Height: H48mm/1.89”
Length: 140 mm/5.51”
Weight: 256 g/9.0 oz
Note: Suitable for AR style rifles platforms with illuminators mounted
on top of the handguard. Allows the scope to be mounted 70
mm/2.76” further forward.
EAN: 7340150700836
9
34 mm Unimounts
SP-4011 Scope Mount Ø34 H28mm/1.102" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 28 mm/1.102”
Length: 121 mm/4.76”
Weight: 231 g/8.1 oz
Note: “The GA Precision Mount.” Designed to be used with Bushnell
and S&B 3-12 and 4-16 scopes. Will not work with scopes like
the S&B 5-25 or 3-20, Kahles k624i, US Optics TPAL/EREK or
Nightforce BEAST. Suitable for bolt action rifles with 1-piece
Picatinny rails. A 5
th
clamping screw allows mount to be
mounted as a cantilever.
EAN: 7340150700249
SP-4001 Scope Mount Ø34 H30mm/1.181" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 30 mm/1.18”
Length: 121 mm/4.76”
Weight: 228 g/8.0 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for bolt action rifles with 1-piece
Picatinny rails.
EAN: 7340150700164
SP-4301 Scope Mount Ø34 H30mm/1.18" 3MIL PIC
Rings: 34 mm
Tilt: 3 MIL/10 MOA
Height: 30 mm/1.1.18”
Length: 121 mm/4.76”
Weight: 229 g/8.1 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for bolt action rifles with 1-piece
Picatinny rails.
EAN: 7340150700829
SP-4601 Scope Mount Ø34 H30mm/1.181" 6MIL PIC
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 30 mm/1.18”
Length: 121 mm/4.76”
Weight: 227 g/8.0 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for bolt action rifles with 1-piece
Picatinny rails.
EAN: 7340150700300
10
SP-4901 Scope Mount Ø34 H30mm/1.181" 9MIL PIC
Rings: 34 mm
Tilt: 9 MIL/30 MOA
Height: 30 mm/1.18”
Length: 121 mm/4.76”
Weight: 222 g/7.9 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for bolt action rifles with 1-piece
Picatinny rails.
EAN: 7340150700393
SP-4801 Scope Mount Ø34 H30mm/1.181" 13MIL PIC
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 30 mm/1.18”
Length: 121 mm/4.76”
Weight: 224 g/7.9 oz
Note: Designed to be used with S&B 5-25 scopes. Will fit most 34 mm
scope tubes except for US Optics TPAL/EREK and Nightforce
BEAST. Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700348
SP-4026 Cantilever Scope Mount Ø34 H32mm/1.26" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 32 mm/1.26”
Length: 140 mm/5.51”
Weight: 224 g/7.9 oz
Note: “The Noveske Shooting Team Mount.” Suitable for AR style rifles.
Allows the scope to be mounted 70 mm/2.76” further forward.
EAN: 7340150700263
QDP-4006 Scope Mount Ø34 H34mm/1.35" 0MIL QDP
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 121 mm/4.76” (mount body only)
Weight: 260 g/9.2 oz
Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Quick-release model.
EAN: 7340150705305
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 121 mm/4.76”
Weight: 237 g/8.4 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails but
may be too low for some lens caps.
EAN: 7340150700218
11
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 105 mm/4.13”
Weight: 210 g/7.4 oz
Note: Designed specifically for the S&B 5-20x50 Ultra Short.
QDP-4046 Cantilever Scope Mount Ø34 H34mm/1.35" 0MIL QDP
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 151 mm/5.94” (mount body only)
Weight: 268 g/9.5 oz
Note: Dual adjustable QDP levers. Suitable for AR-style rifles. Allows the
scope to be mounted 40 mm/1.57” further forward. Quick-release
model.
EAN: 7340150705138
SP-4636 Scope Mount Ø34 H34mm/1.35" 6MIL PIC
Rings: 34 mm
Tilt: 6 MIL/20.6OA
Height: 34 mm/1.35”
Length: 105 mm/4.13”
Weight: 220 g/7.8 oz
Note: Designed specifically for the S&B 5-20x50 Ultra Short.
EAN: 7340150700867
QDP-4002 Scope Mount Ø34 H38mm/1.5" 0MIL QDP
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76” (mount body only)
Weight: 267 g/9.4 oz
Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Quick-release model.
EAN: 7340150705053
SP-4002 Scope Mount Ø34 H38mm/1.5" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76”
Weight: 263 g/9.3 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700171
12
SP-4003B Scope Mount Ø34 H38mm/1.5" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 147 mm/5.79”
Weight: 268 g/9.5 oz
Note: Extended mount designed for US Optics TPAL/EREK and
Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700195
QDP-4016 Cantilever Scope Mount Ø34 H38mm/1.5" 0MIL QDP
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 151 mm/5.94” (mount body only)
Weight: 270 g/9.5 oz
Note: Dual adjustable QDP levers. Suitable for AR-style rifles.
Allows the scope to be mounted 40 mm/1.57” further forward.
Quick-release model.
EAN: 7340150705060
SP-4016 Cantilever Scope Mount Ø34 H38mm/1.5" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 252 g/8.9 oz
Note: Suitable for AR style rifles. Absolute co-witness with back-up
iron sights. Allows the scope to be mounted 40 mm/1.57” further
forward.
EAN: 7340150700256
SP-4022 Cantilever Scope Mount Ø34 H38mm/1.5" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 140 mm/5.51”
Weight: 246 g/8.7 oz
Note: Suitable for AR style rifles. A combination of the SP-3026 extended
cantilever and the height of the SP-3016. Absolute co-witness with
back-up iron sights. Allows the scope to be mounted 70 mm/2.76”
further forward.
EAN: 7340150701321
SP-4302 Scope Mount Ø34 H38mm/1.5" 3MIL PIC
Rings: 34 mm
Tilt: 3 MIL/10 MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76”
Weight: 256 g/9.0 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700294
13
QDP-4602 Scope Mount Ø34 H38mm/1.5" 6MIL QDP
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76” (mount body only)
Weight: 267 g/9.4 oz
Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Quick-release model.
EAN: 7340150705077
SP-4602 Scope Mount Ø34 H38mm/1.5" 6MIL PIC
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76”
Weight: 257 g/9.1 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700317
SP-4603B Scope Mount Ø34 H38mm/1.5" 6MIL PIC
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 147 mm/5.79”
Weight: 268 g/9.5 oz
Note: Extended mount designed for US Optics TPAL/EREK and
Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700324
QDP-4616 Cantilever Scope Mount Ø34 H38mm/1.5" 0MIL QDP
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 151 mm/5.94” (mount body only)
Weight: 270 g/9.5 oz
Note: Dual adjustable QDP levers. Suitable for AR-style rifles.
Allows the scope to be mounted 40 mm/1.57” further forward.
Quick-release model.
EAN: 7340150705084
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 252 g/8.9 oz
Note: Suitable for long-range AR style rifles. Absolute co-witness
with back-up iron sights. Allows the scope to be mounted 40
mm/1.57” further forward.
14
SP-4902 Scope Mount Ø34 H38mm/1.5" 9MIL PIC
Rings: 34 mm
Tilt: 9 MIL/30 MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76”
Weight: 248 g/8.7 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700409
SP-4802 Scope Mount Ø34 H38mm/1.5" 13MIL PIC
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 38 mm/1.5”
Length: 121 mm/4.76”
Weight: 254 g/9.0 oz
Note: Designed to be used with S&B 5-25 scopes. Will fit most 34 mm
scope tubes except for US Optics TPAL/EREK and Nightforce
BEAST. Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments.
EAN: 7340150700355
SP-4803B Scope Mount Ø34 H38mm/1.5" 13MIL PIC
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 38 mm/1.5”
Length: 147 mm/5.79”
Weight: 268 g/9.5 oz
Note: Extended mount designed for US Optics TPAL/EREK and
Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700362
SP-4007 Scope Mount Ø34 H39mm/1.535" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 39 mm/1.535"
Length: 121 mm/4.76”
Weight: 259 g/9.1 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails.
Aligns with many clip-on NV attachments.
EAN: 7340150700225
SP-4008 Scope Mount Ø34 H44mm/1.73" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 44 mm/1.73"
Length: 121 mm/4.76”
Weight: 262 g/9.3 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails in
conjunction with high clip-on NV attachments such as the NSV-80.
EAN: 7340150700232
15
SP-4808 Scope Mount Ø34 H44mm/1.73" 13MIL PIC
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 44 mm/1.73"
Length: 121 mm/4.76”
Weight: 257 g/9.1 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails in
conjunction with high clip-on NV attachments such as the NSV-80.
EAN: 7340150700386
SP-41808 Scope Mount Ø34 H48mm/1.89" 18MIL PIC
Rings: 34 mm
Tilt: 18 MIL/61.8 MOA
Height: 44 mm/1.73"
Length: 121 mm/4.76”
Weight: 258 g/9.1 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails in
conjunction with high clip-on NV attachments such as the NSV-80.
EAN: 7340150700287
SP-4004 Scope Mount Ø34 H48mm/1.89" 0MIL PIC
Rings: 34 mm
Tilt: 0 MIL/MOA
Height: 48 mm/1.89”
Length: 121 mm/4.76”
Weight: 269 g/9.5 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails in
conjunction with high clip-on NV attachments such as the NSV-80.
EAN: 7340150700201
Tilt: 0 MIL/MOA
Height: H48mm/1.89”
Length: 140 mm/5.51”
Weight: 264 g/9.3 oz
Note: Suitable for AR style rifles platforms with illuminators mounted
on top of the handguard. Allows the scope to be mounted 70
mm/2.76” further forward.
SP-4804 Scope Mount Ø34 H48mm/1.89" 13MIL PIC
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 48 mm/1.89”
Length: 121 mm/4.76”
Weight: 265 g/8.3 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Suitable for extended Picatinny rails in
conjunction with high clip-on NV attachments such as the NSV-80.
EAN: 7340150700379
16
35 mm Unimounts
SP-5001 Scope Mount Ø35 H30mm/1.181" 0MIL PIC
Rings: 35 mm
Tilt: 0 MIL/MOA
Height: 30 mm/1.18”
Length: 126 mm/4.96”
Weight: 239 g/8.4 oz
Note: Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700416
SP-5601 Scope Mount Ø35 H30mm/1.181" 6MIL PIC
Rings: 35 mm
Tilt: 6 MIL/20.6 MOA
Height: 30 mm/1.18”
Length: 126 mm/4.96”
Weight: 238 g/8.4 oz
Note: Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700447
SP-5006 Scope Mount Ø35 H34mm/1.35" 0MIL PIC
Rings: 35 mm
Tilt: 0 MIL/MOA
Height: 34 mm/1.35”
Length: 126 mm/4.96”
Weight: 251 g/8.9 oz
Note: Suitable for extended Picatinny rails but may be too low
for some lens caps.
EAN: 7340150700430
QDP-5002 Scope Mount Ø35 H38mm/1.5" 0MIL QDP
Rings: 35 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96” (mount body only)
Weight: 277 g/9.8 oz
Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK.
Suitable for extended Picatinny rails.
Quick-release model.
EAN: 7340150705268
SP-5002 Scope Mount Ø35 H38mm/1.5" 0MIL PIC
Rings: 35 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 272 g/9.6 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments.
EAN: 7340150700423
17
SP-5016 Cantilever Scope Mount Ø35 H38mm/1.5" 0MIL PIC
Rings: 35 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 260 g/9.2 oz
Note: Suitable for AR style rifles. Absolute co-witness with back-up
iron sights. Allows the scope to be mounted 40 mm/1.57” further
forward.
EAN: 7340150701246
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 268 g/9.5 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments.
SP-5616 Cantilever Scope Mount Ø35 H38mm/1.5" 6MIL PIC
Rings: 35 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 255 g/9.0 oz
Note: Suitable for AR style rifles. Absolute co-witness with back-up
iron sights. Allows the scope to be mounted 40 mm/1.57” further
forward.
EAN: 7340150701253
SP-5808 Scope Mount Ø35 H44mm/1.73" 13MIL PIC
*** COMING IN 2020 ***
Rings: 35 mm
Tilt: 13 MIL/44.4 MOA
Height: 44 mm/1.73"
Length: 126 mm/4.96”
Weight: TBD
Note: Will fit most 35 mm scope tubes except for US Optics TPAL/EREK.
Suitable for extended Picatinny rails in conjunction with high clip-on
NV attachments such as the NSV-80.
EAN: TBD
18
36 mm Unimounts
SP-6001 Scope Mount Ø36 H30mm/1.18" 0MIL PIC
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: 30 mm/1.18”
Length: 139 mm/5.47”
Weight: 240 g/8.5 oz
Note: Suitable for bolt action rifles with 1-piece Picatinny rails.
Designed for Zeiss V8. Will not fit Hensoldt ZF 3.5-26x56.
EAN: 7340150700850
SP-6601 Scope Mount Ø36 H30mm/1.18" 6MIL PIC
Rings: 36 mm
Tilt: 6 MIL/20.6 MOA
Height: 30 mm/1.18”
Length: 139 mm/5.47”
Weight: 247 g/8.7 oz
Note: Suitable for bolt action rifles with 1-piece Picatinny rails.
Designed for Zeiss V8. Will not fit Hensoldt ZF 3.5-26x56.
EAN: 7340150701222
SP-6026 Cantilever Scope Mount Ø36 H32mm/1.26" 0MIL PIC
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: 32 mm/1.26”
Length: 140 mm/5.51”
Weight: 223 g/7.9 oz
Note: “The Noveske Shooting Team Mount.” Suitable for AR style rifles.
Allows the scope to be mounted 70 mm/2.76” further forward.
EAN: 7340150700492
QDP-6002 Scope Mount Ø36 H38mm/1.5" 0MIL QDP
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96” (mount body only)
Weight: 279 g/9.8 oz
Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Quick-release model.
EAN: 7340150705275
SP-6002 Scope Mount Ø36 H38mm/1.5" 0MIL PIC
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 139 mm/5.47”
Weight: 272 g/9.6 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments. Designed for Hensoldt ZF 3.5-26x56.
EAN: 7340150700461
19
QDP-6016 Cantilever Scope Mount Ø36 H38mm/1.5" 0MIL QDP
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 151 mm/5.94” (mount body only)
Weight: 289 g/10.2 oz
Note: Dual adjustable QDP levers. Suitable for extended Suitable for AR-
style rifles. Allows the scope to be mounted 40 mm/1.57” further
forward. Quick-release model.
EAN: 7340150705091
SP-6016 Cantilever Scope Mount Ø36 H38mm/1.5" 0MIL PIC
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 154 mm/6.06"
Weight: 264 g/9.3 oz
Note: Suitable for AR style rifles. Absolute co-witness with back-up
iron sights. Allows the scope to be mounted 40 mm/1.57” further
forward.
EAN: 7340150700485
SP-6602 Scope Mount Ø36 H38mm/1.5" 6MIL PIC
Rings: 36 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 128 mm/5.04”
Weight: 273 g/9.6 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments. Designed for Hensoldt ZF 3.5-26x56.
EAN: 7340150701239
SP-61602 Scope Mount Ø30 H38mm/1.5” 16MIL PIC
Rings: 36 mm
Tilt: 16 MIL/55 MOA
Height: 38 mm/1.5”
Length: 139 mm/5.47”
Weight: 272 g/9.6 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments. Designed for Hensoldt ZF 3.5-26x56.
EAN: 7340150700508
SP-6004 Scope Mount Ø36 H48mm/1.89" 0MIL PIC
Rings: 36 mm
Tilt: 0 MIL/MOA
Height: H48mm/1.89"
Length: 139 mm/5.47”
Weight: 291 g/10.3 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments. Designed for Hensoldt ZF 3.5-26x56.
EAN: 7340150700478
20
40 mm Unimounts
SP-7001 Scope Mount Ø40 H30mm/1.181" 0MIL PIC
Rings: 40 mm
Tilt: 0 MIL/MOA
Height: 30 mm/1.18”
Length: 126 mm/4.96”
Weight: TBD
Note: Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700898
SP-7601 Scope Mount Ø40 H30mm/1.181" 6MIL PIC
Rings: 40 mm
Tilt: 6 MIL/20.6 MOA
Height: 30 mm/1.18”
Length: 126 mm/4.96”
Weight: 234 g/8.3 oz
Note: Suitable for bolt action rifles with 1-piece Picatinny rails.
EAN: 7340150700515
QDP-7002 Scope Mount Ø40 H38mm/1.5" 0MIL QDP
Rings: 40 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96” (mount body only)
Weight: 288 g/10.2 oz
Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK.
Suitable for extended Picatinny rails. Quick-release model.
EAN: 7340150705282
SP-7002 Scope Mount Ø40 H38mm/1.5" 0MIL PIC
Rings: 40 mm
Tilt: 0 MIL/MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 272 g/9.6 oz
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments.
EAN: 7340150700812
SP-7602 Scope Mount Ø40 H38mm/1.5" 6MIL PIC
Rings: 40 mm
Tilt: 6 MIL/20.6 MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 270 g/9.6
Note: Suitable for extended Picatinny rails. Aligns with many
clip-on NV attachments.
EAN: 7340150700751
21
ACCURACY INTERNATIONAL DOVETAIL MOUNTS
30 mm Unimounts
SA-3601 Scope Mount Ø30 H35mm/1.378" 6MIL AI
Rings: 30 mm
Tilt: 6 MIL/20.6 MOA
Height: 35 mm/1.38”
Length: 126 mm/4.96”
Weight: 226 g/8.0 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
EAN: 7340150700003
34 mm Unimounts
SA-4601 Scope Mount Ø34 H35mm/1.378" 6MIL AI
Rings: 34 mm
Tilt: 6 MIL/20.6 MOA
Height: 35 mm/1.38”
Length: 121 mm/4.76”
Weight: 224 g/7.9 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST.
EAN: 7340150700010
SA-4901 Scope Mount Ø34 H35mm/1.378" 9MIL AI
Rings: 34 mm
Tilt: 9 MIL/30 MOA
Height: 35 mm/1.38”
Length: 121 mm/4.76”
Weight: 223 g/7.9 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST.
EAN: 7340150700041
SA-4801 Scope Mount Ø34 H35mm/1.378" 13MIL AI
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 35 mm/1.38”
Length: 121 mm/4.76”
Weight: 224 g/7.9 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST.
EAN: 7340150700034
22
Tilt: 9 MIL/30 MOA
Height: 44 mm/1.732"
Length: 121 mm/4.76”
Weight: 240 g/8.5 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Designed for use with NV attachments.
23
SAKO TRG/TIKKA T3 DOVETAIL MOUNTS
30 mm Unimounts
ST-3701 Scope Mount Ø30 H35mm/1.378" 7MIL TRG
Rings: 30 mm
Tilt: 7 MIL/24 MOA
Height: 35 mm/1.38”
Length: 126 mm/4.96”
Weight: 241 g/8.5 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
EAN: 7340150700577
34 mm Unimounts
ST-4701 Scope Mount Ø34 H35mm/1.378" 7MIL TRG
Rings: 34 mm
Tilt: 7 MIL/24 MOA
Height: 35 mm/1.38”
Length: 121 mm/4.76”
Weight: 235 g/8.3 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST.
EAN: 7340150700584
ST-4801 Scope Mount Ø34 H35mm/1.378" 13MIL TRG
Rings: 34 mm
Tilt: 13 MIL/44.4 MOA
Height: 35 mm/1.38”
Length: 121 mm/4.76”
Weight: 238 g/8.4 oz
Note: Designed to be used with S&B 5-25 scopes. Will fit most 34 mm
scope tubes except for US Optics TPAL/EREK and Nightforce
BEAST.
EAN: 7340150700607
ST-4708 Scope Mount Ø34 H44mm/1.732" 7MIL TRG
Rings: 34 mm
Tilt: 7 MIL/24 MOA
Height: 44mm/1.732”
Length: 121 mm/4.76”
Weight: 258 g/9.1 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Designed for use with NV attachments.
EAN: 7340150700591
24
Tilt: 13 MIL/44.4 MOA
Height: 44mm/1.732”
Length: 121 mm/4.76”
Weight: 256 g/9.0 oz
Note: Designed to be used with S&B 5-25 scopes. Will fit most 34 mm
scope tubes except for US Optics TPAL/EREK and Nightforce
BEAST. Designed for use with NV attachments.
36 mm Unimounts
ST-6401 Scope Mount Ø36 H35mm/1.378" 4MIL TRG
Rings: 36 mm
Tilt: 4 MIL/14 MOA
Height: 35 mm/1.38”
Length: 126 mm/4.96”
Weight: TBD
Note: Will fit most 36 mm scope tubes. Will not fit Hensoldt ZF 3.5-26x56.
EAN: 7340150700881
40 mm Unimounts
ST-7601 Scope Mount Ø40 H35mm/1.378" 6MIL TRG
Rings: 40 mm
Tilt: 6 MIL/20.6 MOA
Height: 35 mm/1.38”
Length: 126 mm/4.96”
Weight: 249 g/8.8 oz
Note: Will fit most 40 mm scope tubes.
EAN: 7340150700874
25
SAUER DOVETAIL MOUNTS
30 mm Unimounts
Tilt: 6 MIL/20.6 MOA
Height: 35 mm/1.38”
Length: 126 mm/4.96”
Weight: 221 g/7.8 oz
Note: Will fit most 30 mm scope tubes except for US Optics TPAL/EREK.
Includes adjustable recoil screw,
34 mm Unimounts
Tilt: 9 MIL/30 MOA
Height: 35 mm/1.38”
Length: 121 mm/4.76”
Weight: 221 g/7.8 oz
Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK
and Nightforce BEAST. Includes adjustable recoil screw,
26
SEPARATE PICATINNY RINGS
30 mm Separate Rings
SR-3000 Separate Rings Ø30 H25.4mm/1"
Rings: 30 mm
Height: 25.4 mm/1”
Length: 32 mm/1.26”
Weight: 175 g/6.2 oz
Note: Suitable for bolt action rifles with Picatinny rails.
EAN: 7340150700522
Height: 34 mm/1.35”
Length: 32 mm/1.26”
Weight: 201 g/7.1 oz
Note: Suitable for all rifles with Picatinny rails.
EAN: 7340150700737
34 mm Separate Rings
SR-4000 Separate Rings Ø34 H25.4mm/1"
Rings: 34 mm
Height: 25.4 mm/1”
Length: 32 mm/1.26”
Weight: 183 g/6.5 oz
Note: Suitable for bolt action rifles with Picatinny rails.
EAN: 7340150700546
Height: 34 mm/1.35”
Length: 32 mm/1.26”
Weight: 201 g/7.1 oz
Note: Suitable for all rifles with Picatinny rails.
EAN: 7340150700744
27
RED DOT MOUNTS
Aimpoint Micro Mounts
SM-1900 Aimpoint Micro Mount, 22 mm/0.866"
Height: 22 mm/0.866"
Weight: 45 g/1.6 oz
Note: Suitable for rifles with high Picatinny rails.
EAN: 7340150701048
SM-2001 Aimpoint Micro Mount, 30 mm/1.18"
Height: 30 mm/1.18"
Weight: 63 g/2.2 oz
Note: Suitable for rifles with high Picatinny rails.
EAN: 7340150701055
SM-2007 Aimpoint Micro Mount, Absolute
*** RENAMED SM-2002 IN 2017 ***
Height: 38 mm/1.5"
Weight: 88 g/3.1 oz
Note: Absolute co-witness with Aimpoint T2.
Suitable for flat-top AR15/M4.
EAN: 7340150701062
SM-2007B Aimpoint Micro Mount, Lower 1/3
*** RENAMED SM-2002B IN 2017 ***
Height: 41 mm/1.614"
Weight: 91 g/3.2 oz
Note: The toughest Aimpoint Micro Mount on the market.
Lower 1/3 co-witness with Aimpoint T2. Suitable for
flat-top AR15/M4.
EAN: 7340150701079
Height: 30 mm/1.18"
Weight: 80 g/2.8 oz
Note: Suitable for rifles with high Picatinny rails. Quick detachable.
EAN: 7340150705350
Weight: 90 g/3.2 oz
Note: Absolute co-witness with Aimpoint T2. Quick detachable.
Suitable for flat-top AR15/M4.
EAN: 7340150705312
28
QDM-2002B Aimpoint Micro Mount, Lower 1/3 QD
Height: 42 mm/1.65"
Weight: 97 g/3.4 oz
Note: The toughest Aimpoint Micro Mount on the market.
Lower 1/3 co-witness with Aimpoint T2. Quick detachable.
Suitable for flat-top AR15/M4.
EAN: 7340150705329
29
Trijicon MRO Mounts
SM-3002 Trijicon MRO Mount, Absolute
Height: 38 mm/1.5"
Weight: 52 g/1.8 oz
Note: The toughest MRO Mount on the market. Absolute co-witness.
Suitable for flat-top AR15/M4.
EAN: 7340150701093
SM-3002B Trijicon MRO Mount, Lower 1/3
Height: 42 mm/1.65"
Weight: 59 g/2.1 oz
Note: The toughest MRO Mount on the market. Lower 1/3 co-witness.
Suitable for flat-top AR15/M4.
EAN: 7340150701130
QDM-3001 Trijicon MRO Mount, 30 mm/1.18” QD
Height: 30 mm/1.18"
Weight: 65 g/2.3 oz
Note: The toughest MRO Mount on the market. Quick detachable.
Suitable for rifles with high Picatinny rails.
EAN: 7340150705367
QDM-3002 Trijicon MRO Mount, Absolute QD
Height: 38 mm/1.5"
Weight: 75 g/2.6 oz
Note: The toughest MRO Mount on the market. Absolute co-witness.
Quick detachable. Suitable for flat-top AR15/M4.
EAN: 7340150705336
QDM-3002B Trijicon MRO Mount, Lower 1/3 QD
Height: 42 mm/1.65"
Weight: 87 g/3.1 oz
Note: The toughest MRO Mount on the market. Lower 1/3 co-witness.
Quick detachable. Suitable for flat-top AR15/M4.
EAN: 7340150705343
30
PICATINNY GEN2 SCOPE BASES
High Quality Dehorned Scope Mount Bases
Based on a decade of experience designing and manufacturing the original Ideal Scope Mount System –
including a vast number of accessories – as well as forends and stock assemblies for various firearms,
we are proudly providing you with the Next Generation Picatinny Rail Scope Bases.
Our Picatinny Gen2 scope bases feature properly dehorned edges for improved repeatability and a
smooth touch. Using 7075 T651 aluminum we combine strength and durability with low weight.
The rails come with 6-48x1/4" Torx 10-screws and stainless-steel pins for optional pinning of the scope
base to the action. Can be used on right and left-handed actions alike.
Remington 700
R-7001 Remington 700 SA Scope Base 0MIL
Tilt: 0 MIL/MOA
Height: 10 mm/0.39”
Length: 145 mm/5.7”
Weight: 53 g/1.9 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706302
R-7601 Remington 700 SA Scope Base 6MIL
Tilt: 6 MIL/20.6 MOA
Height: 10 mm/0.39”
Length: 145 mm/5.7”
Weight: 55 g/1.9 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706395
R-7002 Remington 700 SA Scope Base 0MIL Extended
Tilt: 0 MIL/MOA
Height: 10 mm/0.39”
Length: 175 mm/6.89”
Weight: 64 g/2.3 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706319
31
Height: 10 mm/0.39”
Length: 175 mm/6.89”
Weight: 67 g/2.4 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
Height: 10 mm/0.39”
Length: 164 mm/6.46”
Weight: 58 g/2.0 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
R-7611 Remington 700 LA Scope Base 6MIL
Tilt: 6 MIL/20.6 MOA
Height: 10 mm/0.39”
Length: 164 mm/6.46”
Weight: 58 g/2.0 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706418
R-7012 Remington 700 LA Scope Base 0MIL Extended
Tilt: 0 MIL/MOA
Height: 10 mm/0.39”
Length: 195 mm/7.68”
Weight: 70 g/2.5 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706333
R-7612 Remington 700 LA Scope Base 6MIL Extended
Tilt: 6 MIL/20.6 MOA
Height: 10 mm/0.39”
Length: 195 mm/7.68”
Weight: 74 g/2.6 oz
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706425
32
Sauer STR
R-7042 Sauer 200 STR Scope Base 0MIL Extended
Tilt: 0 MIL/MOA
Height: 15 mm/0.59”
Length: 215 mm/8.46”
Weight: 100 g/3.5 oz
Note: Height is measured from the top of the action to the top of the
Picatinny. Weight includes screws. Add 1.2 g/0.04 oz for pins.
EAN: 7340150706371
Height: 15 mm/0.59”
Length: 215 mm/8.46”
Weight: 107 g/3.8 oz
Note: Height is measured from the top of the action to the top of the
Picatinny. Weight includes screws. Add 1.2 g/0.04 oz for pins.
Tikka T3/T3x
R-7021 Tikka T3/T3x Scope Base 0MIL
Tilt: 0 MIL/MOA
Height: 11 mm/0.43”
Length: 164 mm/6.46”
Weight: 65 g/2.3 oz
Note: Height is measured from the top of the action to the top of the
Picatinny. Weight includes screws. Add 0.8 g/0.03 oz for pins.
EAN: 7340150706340
R-7621 Tikka T3/T3x Scope Base 6MIL
Tilt: 6 MIL/20.6 MOA
Height: 11 mm/0.43”
Length: 164 mm/6.46”
Weight: 67 g/2.4 oz
Note: Height is measured from the top of the action to the top of the
Picatinny. Weight includes screws. Add 0.8 g/0.03 oz for pins.
EAN: 7340150706432
Height: 11 mm/0.43”
Length: 195 mm/7.68”
Weight: 77 g/2.7 oz
Note: Height is measured from the top of the action to the top of the
Picatinny. Weight includes screws. Add 0.8 g/0.03 oz for pins.
33
R-7622 Tikka T3/T3x Scope Base 6MIL Extended
Tilt: 6 MIL/20.6 MOA
Height: 11 mm/0.43”
Length: 195 mm/7.68”
Weight: 81 g/2.9 oz
Note: Height is measured from the top of the action to the top of the
Picatinny. Weight includes screws. Add 0.8 g/0.03 oz for pins.
EAN: 7340150706449
Winchester Model 70
R-7031 Winchester 70 Scope Base 0MIL
*** COMING IN 2020 ***
Tilt: 0 MIL/MOA
Height: 10 mm/0.39”
Length: TBD”
Weight: TBD
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706364
R-7631 Winchester 70 Scope Base 6MIL
*** COMING IN 2020 ***
Tilt: 6 MIL/20.6 MOA
Height: 10 mm/0.39”
Length: TBD”
Weight: TBD
Note: Height is measured from the top of the front vault of the action to
the top of the Picatinny. Weight includes screws. Add 0.8 g/0.03 oz
for pins.
EAN: 7340150706456
34
ACCESSORIES
A-0001 Spacer for Interface, 4 mm/.157”
Height: 4 mm/.157”
Weight: 7 g/0.2 oz
Note: Designed to raise interfaces above turrets and large objectives.
Includes screws.
EAN: 7340150710002
A-0003 Picatinny Rail 10x55 mm
Height: 10 mm/.39”
Length: 55 mm/2.16”
Weight: 18 g/0.6 oz
Note: Picatinny interface for attaching 3
rd
party accessories with
Picatinny clamps to the ISMS scope mount. Includes screws.
EAN: 7340150710040
A-0004 ACI Interface, QD
Weight: 19 g/0.7 oz
Note: QD Interface for attaching Angle Cosine Indicator to the
ISMS scope mount. Includes screws.
EAN: 7340150710064
A-0009 Delta Point Interface
Weight: 17 g/0.6 oz
Note: Interface for attaching a Leupold DeltaPoint to the scope mount.
Will also fit Shield Mini Sight, JPoint, Firepoint, Tasco Optima, and
Trijicon RedDot. Includes screws.
EAN: 7340150710088
A-0010 Trijicon RMR Interface
Weight: 21 g/0.7 oz
Note: Interface for attaching a Trijicon RMR to an ISMS scope mount.
Includes screws.
EAN: 7340150710095
A-0011 Docter/Burris Fastfire Interface
Weight: 16 g/0.6 oz
Note: Interface for attaching a Docter, Burris FastFire, or Vortex Venom
red dot sight to the scope mount. Includes screws.
EAN: 7340150710101
35
A-0011B Docter/Burris Fastfire Protected Interface w/ Hood
Weight: 39 g/1.4 oz
Note: Protected interface with hood for attaching a Docter, Burris
FastFire, or Vortex Venom red dot sight to the scope mount.
Will not fit Burris Fastfire III. Includes screws.
EAN: 7340150710118
A-0011H DR/Burris Hood
Weight: 19 g/0.7 oz
Note: Replacement hood for A-0011B.
EAN: 7340150710125
A-0015 Spacer for Interface, 10 mm/.39”
Height: 10 mm/.39”
Weight: 14 g/0.5 oz
Note: Designed to raise interfaces above turrets and large objectives.
Includes screws.
EAN: 7340150710149
A-0019D Wilcox RAPTAR/RAPTAR-S Adapter, Low
Height: 14 mm/0.55”
Length: 85 mm/3.35” (Picatinny Rail)
Weight: 31 g/1.1 oz
Note: Interface for attaching Wilcox RAPTAR or RAPTAR S laser range
finder with Picatinny riser to ISMS scope mount. Includes screws.
EAN: 7340150710613
A-0021 FLIR Tri-Rail
Length: 120 mm/4.72”
Weight: 262 g/9.3 oz
Note: Interface for mounting FLIR thermal image intensifier to 34 mm
ISMS mount. Fits around front ring. Includes screws.
EAN: 7340150710279
A-0023 ACI Interface
Weight: 16 g/0.6 oz
Note: Interface for attaching Angle Cosine Indicator to the ISMS scope
mount. Includes screws.
EAN: 7340150710170
A-0025 Aimpoint Micro Interface
Weight: 43 g/1.5 oz
Note: Interface for attaching Aimpoint Micro or Vortex SPARC® AR
red dot sight to the right side of the ISMS scope mount (4:30-
position). Includes screws.
EAN: 7340150710187
36
A-0025B Aimpoint Micro Interface, Left
Weight: 43 g/1.5 oz
Note: Interface for attaching Aimpoint Micro or Vortex SPARC® AR red
dot sight to the left side of the ISMS scope mount (7:30-position).
Includes screws.
EAN: 7340150710194
A-0029 Wilcox RAPTAR Adapter
Height: 25 mm/0.984”
Length: 85 mm/3.346” (Picatinny Rail)
Weight: 42 g/1.5 oz
Note: Interface for attaching Wilcox RAPTAR or SilencerCo RADIUS
laser range finder to ISMS scope mount. Includes screws.
EAN: 7340150710200
A-0029B Wilcox RAPTAR/RAPTAR-S Adapter, High
Height: 34 mm/1.34”
Length: 104 mm/4.095” (Picatinny Rail)
Weight: 59 g/2.1 oz
Note: Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) or
SilencerCo RADIUS laser range finder to ISMS scope mount.
Includes screws.
EAN: 7340150710392
A-0029C Gen1 Wilcox RAPTAR-S Adapter, Interrupted Picatinny
Height: 34 mm/1.34”
Length: 104 mm/4.095” (Picatinny Rail)
Weight: 58 g/2.0 oz
Note: Interface for attaching Gen1 Wilcox RAPTAR-S laser range finder
to ISMS scope mount. Features an interrupted rail to compensate
for the mold seam underneath the rail clamp on the Gen1
RAPTAR-S. Includes screws.
EAN: 7340150710415
A-0032 Picatinny Rail 14x75 mm
Height: 14 mm/0.55”
Length: 75 mm/2.95”
Weight: 31 g/1.1 oz
Note: Picatinny interface for attaching 3
rd
party accessories with
Picatinny clamps to the ISMS scope mount. Includes screws.
EAN: 7340150710217
37
A-0037 Picatinny Rail 20x75 mm
Height: 20 mm/0.79”
Length: 75 mm/2.95”
Weight: 32 g/1.1 oz
Note: Picatinny interface for attaching 3
rd
party accessories with
Picatinny clamps to the ISMS scope mount. Includes screws.
EAN: 7340150710224
A-0046B Mirage Band Interface
Weight: 2 g/0.1 oz
Note: Hook for attaching mirage band to front of ISMS scope mounts.
Fits AI, SAKO, and Sauer mirage bands. Cannot be used with
cantilever ISMS scope mounts. Includes screws.
EAN: 7340150710293
Note: Interface for attaching Aimpoint ACRO P-1 red dot sight to ISMS
and Spuhr Hunting Series rings and scope mounts. Includes
screws.
A-0080/81 Leveling Kit, Separate Rings
Note: Leveling kit for indexing the reticle to the Picatinny Rail.
Included with SR-series of rings. Cannot be used with Weaver
rails, ISMS unimounts or ISMS cantilever mounts.
EAN: 7340150710231
A-0090 Picatinny Tri-Rail, Short
Length: 70 mm/2.76”
Weight: 146 g/5.2 oz
Note: Interface for attaching 3
rd
party accessories with Picatinny
clamps to the top and sides of a 34 mm ISMS scope mount.
Fits around front ring on 34 mm mounts. Includes
screws.
EAN: 7340150710248
A-0094 Horus ACI Adapter
Weight: 7 g/0.2 oz
Note: Adapter plate for using Horus Vision Angle Slope Level Indicator
in A-0004 and A-0023 interfaces designed for Sniper Tools LLC
ACI.
EAN: 7340150710309
38
140 mm/5.51” (length of Picatinny)
Weight: 200 g/7.0 oz
Note: Adapter rail for attaching a clip-on NV device to rifles without
extended Picatinny rails. Attaches to 01- and 02-series mounts
and allows the NV device to be aligned despite tilt. Not for use
on rifles larger than 7.62 NATO. Includes screws.
and spare parts in a well-organized way. The A-0039 and
A-0039B kits are in government use and contain various
customer specified captive-screw accessories, spare parts,
and a Torx key to make field expedient repairs.
EAN: 7340150710323 (A-0039)
7340150710330 (A-0039B)
39
Simrad Interfaces
Please note that Simrad image intensifiers are available with a wide assortment of locking interfaces.
As an example; the KN200 and KN250 series can be had with both single and dual lever interfaces with
various lengths and shapes. The length and diameter of the rifle scope will also impact which interface
will fit and which will not.
Height: 29.5 mm/1.161” (from centerline)
Weight: 70 g/2.5 oz
Note: Replacement front top cover for mounting single-lever Simrad
KN200/250 Image Intensifier to a 34 mm mount. 7.5 mm offset.
Not for US Simrad dovetails.
Weight: 16 g/0.6 oz
Note: Interface for mounting single-lever Simrad KN200/250 Image
Intensifier to a 30 mm mount with short scope such as the
S&B 3-12x50. Not for US Simrad dovetails. Includes screws.
A-0014B Simrad Mount Short, 40 mm
Height: 24 mm/0.945” (from centerline)
Weight: 18 g/0.6 oz
Note: Interface for mounting single-lever Simrad KN200/250 Image
Intensifier to a 34 mm mount with short scope such as the
S&B 3-12x50. 0mm offset. Not for US Simrad dovetails.
Includes screws.
EAN: 7340150710132
Weight: 28 g/1.0 oz
Note: Interface for mounting single-lever Simrad KN200/250 Image
Intensifier to a 34 mm mount. 2 mm offset. Not for US Simrad
dovetails. Includes screws.
A-0018 US Simrad Mount
Height: 24 mm/0.945” (from centerline)
Weight: 25 g/0.9 oz
Note: Interface for mounting single-lever Simrad KN200/250 Image
Intensifier to a 34 mm mount. For US Simrad dovetails. Includes
screws.
EAN: 7340150710163
40
Weight: N/A
Note: Interface for mounting single-lever Simrad KN200/250 Image
Intensifier to a 34 mm mount with short scope such as the
S&B 3-12x50. Not for US Simrad dovetails. Includes screws.
EAN: 7340150710361
Weight: 77 g/2.7 oz
Note: Replacement front top cover for mounting single-lever Simrad
KN200/250 Image Intensifier to a Gen1 34 mm mount. 7.5 mm
offset. Not for US Simrad dovetails.
Weight: 77 g/2.7 oz
Note: Replacement front top cover for mounting single-lever Simrad
KN200/250 Image Intensifier to a Gen1 34 mm mount with
short scope such as the S&B 3-12x50. 7.5 mm offset. Not for
US Simrad dovetails.
A-0115 Simrad Interface, Magnum
Height: 45.5 mm/1.791” (from centerline)
Weight: 120 g/4.2 oz
Note: Replacement front top cover for mounting dual-lever Simrad
KN200/250 Image Intensifier to a Gen2 34 mm mount. Not for
US Simrad dovetails. For heavy recoiling rifles.
EAN: 7340150710286
SAMPLE IMAGE
41
Non-Spuhr Accessories
In addition to products of our own manufacture we also carry a limited number of accessories manufactured by
other companies. These are products that fulfill our demands on quality and functionality, and we are very pleased
to be working with these companies.
ACIMIL-A2 MilSpec Angle Cosine Indicator
Weight: 22 g/0.8 oz
Note: The Sniper Tools Angle Cosine Indicator (ACI,) is a simple tool for
snipers/hunters in mountainous terrain for determining the angle
to the target so that adjustments can be made to achieve the correct
Point-of-Impact. The cosine numbers are laser engraved onto the
body in 5-degree increments.
Manufacturer: Sniper Tools Design Co., USA
HH-0001 Hawk Hill Custom D.O.P.E. Card Holder
Weight: 50 g/1.8 oz
Card Size: 73 x 61 mm/2.87"x2.40"
Note: The Hawk Hill Custom "RMD" or Rifle Mounted Data-Holder, also
known as a D.O.P.E. card holder (D.O.P.E. = Data Observed from
Previous Engagements,) is designed to revolutionize target data
management. The flexible design with multi axis rotation allows
target data and information to be easily viewed without changing
shooting position. Attaches to Spuhr interface.
Manufacturer: Hawk Hill Custom, USA
sticks, a 25 in/lb and a 45 in/lb torque limiter, and two
each of standard length and extended length Torx 20 bits.
Delivered in slim soft pouch with Velcro panel and PALS.
Includes an
patch.
Manufacturer: Fix It Stick, LLC, USA
42
ISMS SPARE PARTS LIST
Nomenclature
1. Scope Mount Base
2. Side Clamp
3. Rear Top Cover
4. Front Top Cover
5. Bubble Level Vial (A-0110) *
6. Rubber Gasket (A-0170) *
7. Clamping Screws
8. Top Ring Screws (P-100) *
9. Clamping Screws Washers (A-0180) *
10. Set Screw (A-0140) *
11. 10-degree Levelling Key (”Wedge”)
*
Shared by all 1-piece mounts
Scope Mount Base
The Scope Mount Base is marked with the mount model number engraved on the side of the bridge
1
. The batch
number is engraved into the bottom of the mount. Old batch numbers consisted of a single letter followed by four
numbers, such as M-1204 or M12/04, where the numbers indicate year and month. Current batch number format
is four letters, such as NKSX.
Side Clamp
The Side Clamp is marked with model number and batch number on the backside. The part number is an A followed
by four digits. The batch number formats follow the same patterns as that of the Scope Mount Bases.
Top Covers
The Top Covers are marked with a part number and a batch number. The batch number formats follow the same
patterns as that of the Scope Mount Bases and the Side Clamps. Gen1 Top Cover part numbers is an A followed by
four digits
2
whereas Gen2 Top Cover part numbers is an A followed by two digits. Gen2 Top Covers can be
distinguished from Gen1 Top Covers by the side-to-side groove crossing the top:
Note: Gen1 and Gen2 Top Covers are not interchangeable with each other.
1
SA for Accuracy International 11 mm dovetail, QDP or SP for Picatinny/STANAG rail, SS for Sauer STR/SSG69, and ST for SAKO TRG/Tikka T3.
2
Ending on a 0 for Rear Top Cover and a 1 for Front Top Covers.
Gen1 Rear Top Cover, no groove
Gen2 Front Top Cover, w/ groove
43
SIDE CLAMPS
MOUNT MODELS
A-0060
SP-4001, SP-4601, SP-4801, SP-4901
A-0063
SP-4011
A-0064 SP-4002, SP-4004, SP-4006, SP-4007, SP-4008, SP-41808, SP-4302,
SP-4602, SP-4802, SP-4804, SP-4808, SP-4902
A-0065
SP-3002, SP-3004, SP-3006, SP-3602, SP-5002, SP-5006, SP-5602
A-0066
SP-3016, SP-3616, SP-4016, SP-4616
A-0067
Discontinued (first batch of SP-5001)
A-0069
SP-4003B, SP-4603B, SP-4803B
A-0070
SA-4601, SA-4801, SA-4901, ST-4701, ST-4708, ST-4801, ST-4808
A-0071
Discontinued (old style SA/ST-series)
A-0072
SP-6002, SP-6004, SP-61602
A-0075
SR-3000, SR-4000
A-0077
SP-6016
A-0083
SP-3001, SP-3601, SP-5001, SP-5601, SP-7601
A-0084
SP-3026, SP-4026, SP-6026
A-0086
SP-4036
A-0087
SA-3601, ST-3701
A-0092
SS-3601, SS-4901 (2018 model)
A-0098
SR-3006, SR-4006
QD-006
QDP-4002, QDP-4602
QD-008
QDM-series
QD-009
QDP-3016, QDP-3046, QDP-3616 QDP-4016, QDP-4046, QDP-4616
SM-120
SM-2001/2002/2002B/2007/2007B
SM-123
SM-1900/3002/3002B
TOP COVERS
MOUNT MODELS
A-0030
All Gen1 30 mm mounts, Rear
A-0031
All Gen1 30 mm mounts, Front
A-0040
Gen1 34 mm mounts, Rear
A-0040B
SP-4036, Rear, Gen1
A-0041
All Gen1 34 mm mounts, Front
A-0050
All Gen1 35 mm mounts, Rear
A-0051
All Gen1 35 mm mounts, Front
A-0073
All Gen1 36 mm mounts, Rear
A-0074
All Gen1 36 mm mounts, Front
A-0096
All Gen1 40 mm mounts, Rear
A-0097
All Gen1 40 mm mounts, Front
A-30
All Gen2 30 mm mounts, Rear
A-31
All Gen2 30 mm mounts, Front
A-40
Gen2 34 mm mounts, Rear
A-40B
SP-4036, Rear, Gen2
A-41
All Gen2 34 mm mounts, Front
A-50
All Gen2 35 mm mounts, Rear
A-51
All Gen2 35 mm mounts, Front
A-60
All Gen2 36 mm mounts, Rear
A-61
All Gen2 36 mm mounts, Front
A-70
All Gen2 40 mm mounts, Rear
A-71
All Gen2 40 mm mounts, Front
Gen1 Rear Top Cover, no groove
Gen2 Rear Top Cover, w/ groove
44
OTHER
MOUNT MODELS
DESCRIPTION
A-0085
SA/ST-series
Recoil Screw
A-0111
SR-series
5 mm Bubble Level Vial
A-0155
SR-series
Bubble Level Retainer Clip
A-0190
SR-series
4.5 mm Rubber Washer
S-1003
SS-series
6-48x1/4" WH Torx 10 Recoil Screw Recoil Screw
QD-003
QDP-series
QD Lever Hinge Pin Screw
QD-004
QDP-series
QD Locking Block
QD-005
QDP-series
QD Friction Plate
S-1025
QDP-series
M4x16 Tensioning Screw
S-2107
QDP-series
Side Clamp Compression Spring
S-2506
QDP-series
Tensioning Screw Disc Spring
ZQD-010
QDP-series
QD Lever Assembly
CLAMPING
SCREWS
MOUNT MODELS
A-0130
All SP-XX02, SP-XX03b, SP-XX04, SP-XX06, SP-XX07, SP-XX08,
SP-XX16, SP-XX26, and SP-XX36 models
A-0135
All SA and ST models
A-0150
All SP-XX01 and SP-XX11 models, SR-3000 and SR-4000
S-1332
All SS models and SM-3002/3002B
“WEDGE”
MOUNT MODELS
A-0080
All 01, 02, 03b, 06, 07, 11, 16, 26, 36, and 46 heights, and SR-series
rings
A-0081
Leveling base for SR-3000 and SR-4000
A-0082
All 04 and 08 heights
45
CHOOSING A MOUNT
We have the world's most comprehensive line of tactical scope mounts; it currently spans about 60 different models
of various heights, tilts, lengths and ring dimensions. We have therefore compiled this short guide to help you
choose the right mount for your needs.
Picatinny or direct/dovetail mount?
The first question is if the mount should be a Picatinny mount (models beginning with SP or QDP) or a direct
attachment mount such as our line of ISMS mounts for Accuracy International (SA,) Sako TRG/Tikka T3x (ST,) and
Sauer SSG (SS)?
The main reason for using a direct mount is to allow a stronger and lower positioning of the rifle scope. If there is
no other need for a Picatinny rail we generally recommend direct mounts on these rifles.
Please note that both Accuracy International and Sako are now making rifles that have Picatinny rails rather than
their traditional dovetails, so make sure which style of mount is needed for your rifle.
Cantilever or block mount?
As can be seen from the first 20 pages of this catalog most of our mounts are standard block mounts as these will
be the best choice for most rifles on the market.
There are some exceptions though: AR15 rifles usually require a cantilever mount for a comfortable shooting
position, and an AR15 with an adjustable stock will more often need a more extreme cantilever than an AR10/SR25
due to the difference in length of the upper receiver. As such, if your rifle has a monolithic upper we recommend
using a standard block mount rather than a cantilever design, as a cantilever will be more susceptible to side forces
than a non-cantilever design.
Height
The height of our mounts is always measured from the top of the rail to the centerline of the scope. In the case of
a tilted mount the measurement is made at the back plane of the rear ring.
So which height do you need? First off you need to know the outer diameter of your objective. Please note that "3-
12x56" does not mean that the scope has an outer objective diameter of 56 mm - only that the objective lens is 56
mm in diameter. Different scopes have different outer diameters for the same lens diameters and it's not
uncommon that different models from the same manufacturer feature different outer diameters even if the lens
diameter is the same.
Take the measurement above and divide it by two (2) to get the theoretical minimum height required if the optics
will be mounted onto a flat rail that extends to and/or past the objective bell. This theoretical minimum height is
theoretical for a reason. If the objective has a 62 mm outer diameter and you choose a 31 mm high mount the
objective will be in contact with the rail. You will therefore need to add to the theoretical minimum height to get the
practical minimum height.
So how much do you need to add? That depends on your personal preference and on what kind of lens caps etc.,
you want to use. Also, if you want to use a tilted mount/base you will need to add additional clearance.
If you intend to mount the optics onto a bolt action rifle with Picatinny base you can often use a lower mount than
the theoretical minimum height above. Just subtract the height of the base from the theoretical minimum height
mentioned above. Depending on barrel contour you might be able to go even lower. But don't forget to leave some
clearance for lens caps and/or sunshades!
46
Night vision/thermal compatibility
When combining the scope with a clip-on system such as PVS22 or NSV-80, to name a few, the height of the mount
is not important. Also, the instrument doesn’t have to be perfectly in line with the scope.
If we have an offset of 10 mm in height between the primary optic and the NV clip-on the change in point of impact
will be 10 mm on 100 meters as well as 10 mm on 300 and 1000 meters: the point of impact shift is fully parallel.
It is often unnecessary to have extremely high mounts just to facilitate in-line mounting of a clip-on system. Various
systems allow varying degrees of angular difference. A common maximum angular difference is 2 degrees. If you
do want a perfect alignment, we do offer the A-700 Clip-On Adapter that will fit onto any of our SP-***1 and SP-
***2 mounts.
Tilt
Tilted mounts are necessary when shooting at very long distances. We generally recommend as little tilt as possible
as a large amount of tilt may have a negative impact on the quality of the sight picture. In most cases 6-9 MIL (20-
30 MOA) will have no negative impact on sight picture quality while still providing greater available adjustment
range for long-range shooting.
For the greatest available adjustment range you should choose a mount with a tilt that is no more than half of the
scope’s range of elevation. For example, the Schmidt & Bender 5-25x56 PM II has a maximum elevation adjustment
of 26 MIL; you should therefore choose a mount with 13 MIL in tilt (provided there is no tilt in the rail). Doing so
assures that you can adjust the sight out to very long distances while still being able to zero at 100.
However, when mounted in this extreme elevation it’s common to experience optical phenomena such as an oval
sight picture when shooting at near targets. We therefore recommend that when fitting a large elevation scope
(such as 26 MIL) on a .308 rifle that will only be used out to 1000 meters, to choose a 6 MIL/20 MOA tilt as it’s more
than sufficient for that use.
Please note that using a degree of tilt that is more than half of the scope's elevation adjustment will make it
impossible to zero the rifle at 100!
Adding accessories
Several years ago we developed our own interface system – the Spuhr Interface – for attaching accessories to a
surface. As opposed to many other interface systems on the market the Spuhr Interface can be used not only on
handguards but also on other products and parts of the firearm – such as on our scope mounts – and in our
production, we use it for both applications.
The Spuhr Interface has outstanding repeatability and durability and it makes installation of accessories such as
laser range finders and angle cosine indicators very easy. Installation is done using the same Torx 20 driver as for
our rings and clamping screws.
Adding a secondary optic
Though originally more common in the shooting sports, adding a secondary non-magnified red dot sight to work
alongside the primary optic can be very useful on long range rifles and on hunting rifles alike as to quickly
transition from one target to another without having to adjust the magnification, or to engage targets that
suddenly appear close by.
On a heavy rifle that is primarily being shot from a bipod we recommend placing the secondary optic at the 12-
o’clock position using one of our many Picatinny rails or RDS interfaces as it will easier to see over the primary
47
optic than to cant the rifle to the side to use the secondary. On rifles that are primarily fired while standing we
recommend positioning the secondary optic either at the 1:30-position.
If using an Aimpoint Micro as a secondary optic we are very fond of using the A-0025 interface to position the
Aimpoint at the 4:30 position as this will allow the shooter to transition to secondary without breaking cheek-weld
– just cant the rifle to the left and fire.
48
OTHER PRODUCTS
Though famous for our Ideal Scope Mount System the company was founded around the GS-1050
NVG carry system. Since then we have continued to work with other projects relating to various optic
mounts, such as the SM-100 Dual Position Accessory Mount, the SM-101QD Ballistic Adjustable
Mount, and others. We have also worked with various upgrade kits for firearms such as the HK G3,
G36, HK417, and MP5/HK53, and in 2016 we began delivering G3 upgrade kits to the Swedish Armed
Forces.
49
S
puhr i Dalby AB
Terminalvägen 19
SE-246 42 Löddeköpinge
Sweden
+46-46-712012
info@spuhr.com
www.spuhr.com
v2020